Older clients that support DFS may still not support 144. We have left 144 off as we (gradually) roll out DFS to more of our locations.
“Channel 144 was only added for WiFi use in 2013, with the emergence of 802.11ac, in order to support an additional 80 MHz channel. Hence, older 802.11n client devices and some access points do not recognize and therefore cannot operate on Channel 144.” http://www.networkcomputing.com/wireless/channel-bonding-wifi-rules-and-regulations/199326059 Also, Aruba ARM should only get even better as the Rasa analytics become more integrated: http://www.networkworld.com/article/3067760/big-data-business-intelligence/hpe-aruba-buys-networking-analysis-company-rasa-networks.html Kitri Waterman - Network Engineer, UW-IT University of Washington 4545 15th Ave NE Seattle, WA 98105 www.uw.edu From: The EDUCAUSE Wireless Issues Constituent Group Listserv <WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> on behalf of Edward Ip <i...@algonquincollege.com> Reply-To: The EDUCAUSE Wireless Issues Constituent Group Listserv <WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Date: Tuesday, May 30, 2017 at 8:23 AM To: "WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU" <WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Subject: Re: [WIRELESS-LAN] Dynamic vs Static Channel Plans Oops my bad…we disable channel 120, 124, and 128 for the weather station not 144. Edward Ip Algonquin College | 1385 Woodroffe Avenue | Room C316 | Ottawa | Ontario | K2G 1V8 | Canada algonquincollege.com From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Edward Ip Sent: Tuesday, May 30, 2017 11:18 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Dynamic vs Static Channel Plans I don’t know about your region, but we are located in Ottawa, Canada and we have turned off Channel 144 due to a weather radar station located near our city. Could be a possible source. Regards, Edward Ip Algonquin College | 1385 Woodroffe Avenue | Room C316 | Ottawa | Ontario | K2G 1V8 | Canada algonquincollege.com From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Smith, Todd Sent: Tuesday, May 30, 2017 11:09 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU<mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Subject: Re: [WIRELESS-LAN] Dynamic vs Static Channel Plans Hello Jon, Thanks for the input! Aruba’s ARM is frequently been cited as the poster child for dynamic channel plans. I am not using Aruba here but it is probably my next upgrade choice unless something better comes long. Does ARM detect if an AP goes down and adjust TX power and/or channel accordingly? Were you ever able to identify your DFS source on channel 144? Our core facilities are near a regional airport that also serves the Air National Guard and I don’t see DFS timeouts. I have read that sometimes false positives can be generated in DFS channels and channel switches in response. Todd From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU] On Behalf Of Jonathan Miller Todd, We are an Aruba shop using dynamic channel plans. We let Aruba's ARM (Adaptive Radio Management) decide on the best channel for each radio, and in some cases, give it the ability to turn off a 2.4 radio if it detects that there's too much co-channel interference in an area. ARM will not switch channels if there is a client associated to a radio, except in the case of an emergency (DFS beacon, etc). We also let it pick the Tx power within a range that we specify (typically 12 - 15 EIRP on 5GHz, lower on the 2.4). ARM has some secret sauce about how it decides which channel is best, and has some parameters that we can tune, but we haven't really fiddled with the knobs too much. We are using DFS channels, but we haven't had complaints about clients that can't see them. I suspect that part of the reason that we haven't had complaints about dead spots is that we have a pretty dense deployment, so in our res halls, a client should be able to see at 3-4 APs, and the odds of all of them running on a channel that a given client does not support seems to be slim enough. Also, it may be that we just got lucky and don't have too many older 5GHz radios around that don't support all DFS channels. We have disabled channel 144 because we did see some beacon events on it, but all other 5GHz channels are enabled. ________________________________ CONFIDENTIALITY NOTICE: The information contained in this message may be privileged and confidential. If this e-mail contains protected health information, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited, except as permitted by law. If you have received this communication in error, please notify the sender immediately by replying to this message and deleting it from your computer. Thank you ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss.