Our consortium had both Cisco and Aruba, and about 12-18 months ago the Aruba folks tossed in the towel and went Cisco. Various unresolvable problems with Aruba AP’s, including one that required a weekly reboot of a particular model.
As Lee mentions, the grass isn’t always greener, so expect that you’re going to run into issues with any vendor. As such, it’s going to come down to support/resolution and your relationship with the vendor. Startups are great as they have a single product with a single code-train, so they tend to be pretty responsive at the start. Once they have a few years under their belt, and their code base starts to fragment, you’ll get to the same point you have with the big incumbents i.e. too many code bases to support effectively. Jeff From: The EDUCAUSE Wireless Issues Community Group Listserv <WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Date: Thursday, January 9, 2020 at 8:15 AM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU <WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU> Subject: [WIRELESS-LAN] Who has transitioned away from Aruba, and why? All: We’ve been an Aruba shop for a very long time and have around 10,000 access points. While every relationship with vendors have their ups and downs, my frustration with the Aruba is finally peaking to the point that I am considering making the enormous move to choose a different vendor. The biggest reason is with the 8.X code train, and bugs that we just don’t consider appropriate to use in production. It has been one thing after the other, and my extremely talented and qualified Network Architect (Keith Miller) might as well be on the Aruba payroll as much work as he has been doing for them to solve bugs. Just when we think we have one fixed, another one crops up. The big one as of late is with 515s running 8.5 code train. We have them deployed in one of our IT buildings. Periodically, people that are connected to these APs in the 5G band will stop working. To the user, they are browsing a site, then it becomes unresponsive. If they are on their phone, they will disconnect from wifi and everything works fine on cell. Nothing makes an 802.11 network look worse than switching to cell and seeing a problem resolve. Normally, if the users disconnect then reconnect, their problems will go ahead (but I think they end up connecting in the 2.4G band). We’ve been working on this problem with them for months. It always seems as though we have to prove there is a real issue. I’m fed up with it. We are a sophisticated shop. If we have a problem, 9 times out of 10 when we bring it to the vendor, it is a real problem. I’m extra frustrated that due to issues we’ve seen in ResNet on the 8.3X train that we don’t want to abandon our 6 train on main campus. To Aruba’s credit, we purchased around 1,000 515s last year (I think around February). When they could not get good code to support them on, Aruba bought back half of them. I asked for them to buy back half because I thought for sure with the 315s that we would have instead, the issues would be fixed by the time the 315s ran out. Not looking to be the case. So, with that rant over, we are seriously considering looking to move away from Aruba (unless they get their act together really soon). There are other bugs I’m not even mentioning here. For those of you that made the switch to another vendor, I would be curious how long the honeymoon lasted, what were your motivators, and were you happy with the overall results? Of course, this is a great opportunity to plug your vendor. As I see it, we have 3 choices…. Something from Cisco (we had Cisco long ago and dumped them for bugs), something from Extreme (we are a huge Extreme shop so this makes sense), something from Juniper (Mist). Thanks, Ryan Turner Head of Networking The University of North Carolina at Chapel Hill +1 919 445 0113 Office +1 919 274 7926 Mobile r...@unc.edu<mailto:r...@unc.edu> ********** Replies to EDUCAUSE Community Group emails are sent to the entire community list. If you want to reply only to the person who sent the message, copy and paste their email address and forward the email reply. Additional participation and subscription information can be found at https://www.educause.edu/community ********** Replies to EDUCAUSE Community Group emails are sent to the entire community list. If you want to reply only to the person who sent the message, copy and paste their email address and forward the email reply. Additional participation and subscription information can be found at https://www.educause.edu/community