On Sun, Aug 07, 2022 at 06:16:20PM +0100, Nuno Teixeira wrote: > Hello, > > Due to ISP changes I was forced to use ipv6 on my re0 ethernet so I can > have a funcional internet. > > Now I'm trying to get ipv6 on iwlwifi (AX201) with /etc/rc.conf: > --- > wlans_iwlwifi0="wlan0" > create_args_wlan0="wlanmode sta regdomain ETSI country PT" > ifconfig_wlan0_ipv6="inet6 accept_rtadv" > ifconfig_wlan0="WPA SYNCDHCP" > rtsold_enable="YES" > --- > but wpa_supplicant doesn't connect after trying for some seconds. > > How do I obtain more details to help showing my problem? > I've tried "wpa_supplicant_flags="-f /var/log/wpa.log" without success.
Caveat: the last time I used the iwlwifi driver was somewhere between
one and two months ago, during which time there have been several
changes in src related to wifi/linuxkpi stuff.
Hardware: Dell Precision 7550, BIOS revision 1.13.0
Dual stack IPv4+IPv6 worked for me that last time I used iwlwifi.
Here's my relevant configs:
==== begin rc.conf ====
ifconfig_em0_ipv6="inet6 accept_rtadv"
ifconfig_em0="DHCP"
#wlans_iwlwifi0="wlan0"
create_args_wlan0="wlanmode sta"
wlandebug_wlan0="+state +crypto +node +auth +assoc +dot1xsm +wpa"
ifconfig_wlan0="WPA DHCP"
ifconfig_wlan0_ipv6="inet6 accept_rtadv"
==== end rc.conf ====
==== begin `pciconf -lv` ====
iwlwifi0@pci0:0:20:3: class=0x028000 rev=0x00 hdr=0x00 vendor=0x8086
device=0x06f0 subvendor=0x8086 subdevice=0x4070
vendor = 'Intel Corporation'
device = 'Comet Lake PCH CNVi WiFi'
==== end `pciconf -lv` ====
==== begin dmesg.boot ====
27] iwlwifi0: successfully loaded firmware image 'iwlwifi-QuZ-a0-hr-b0-71.ucode'
[27] iwlwifi0: api flags index 2 larger than supported by driver
[27] iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.37
[27] iwlwifi0: loaded firmware version 71.058653f6.0 QuZ-a0-hr-b0-71.ucode
op_mode iwlmvm
[27] iwlwifi0: Detected Intel(R) Wi-Fi 6 AX201 160MHz, REV=0x351
[28] iwlwifi0: Detected RF HR B3, rfid=0x10a100
[28] iwlwifi0: base HW address: [redacted]
==== end dmesg.boot ====
Hopefully this helps. But this is all the info I've got. Please let me
know if you have any questions or comments.
Thanks,
--
Shawn Webb
Cofounder / Security Engineer
HardenedBSD
https://git.hardenedbsd.org/hardenedbsd/pubkeys/-/raw/master/Shawn_Webb/03A4CBEBB82EA5A67D9F3853FF2E67A277F8E1FA.pub.asc
signature.asc
Description: PGP signature
