I donīt think itīll work. Tx signal from one of the AP will most likely saturate the receiver of the other. Such a setup should work if the two APs may be somehow sincronized to refrain emiting while the other is receiving. Youīre better off with 2 antennas; besides, you may want to use a higher gain directitional antenna for one of them.
Mihai Scott L. Thomas wrote: >Hello. I would like to know if it is possible to use a single, 8 dBi omni >antenna with 2 Linksys AP's using a splitter? 1 Linksys AP would be on >channel 1 and the other on channel 11. We would like this scenario in our >neighborhood in order to repeat a signal and avoid having to purchase two >separate antennas and cables. I have seen such splitters on >http://www.hdcom.com/2.4ghz.html and was curious if anyone has tried doing >this. > >Thanks. > >-- >general wireless list, a bawug thing <http://www.bawug.org/> >[un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless > -- general wireless list, a bawug thing <http://www.bawug.org/> [un]subscribe: http://lists.bawug.org/mailman/listinfo/wireless
