Il giorno 26 maggio 2014 12:31, Gioacchino Mazzurco <gmazzurc...@gmail.com>ha scritto:
> Nel kit c'e' anche un cutter per il cavo, ma una volta tagliato poi come > funziona il "crimpaggio" ? > Shortening the POF cable The POF cable can be cut off easily at any point using the included POF cutter. The cable must be cut properly and the cutting edge must be at a 90°-angle for optimum light coupling or uncoupling. Therefore, never cut the POF cable using scissors or a knife - use a POF cutter. Connect the cable in one of the openings of the POF cutter (if necessary, separate the two leads of the POF cable from one another beforehand). The two leads can be cut properly by strongly pressing the button of the POF cutter. Make sure that both leads are of equal length. Each cutting opening of the POF cutter may be used only once, as minute damage to the blade is caused by the POF fi bres and the plastic coating. Otherwise, it may lead to reduction in the maximum attainable cable length or the data transfer rate. Fonte: http://www.produktinfo.conrad.com/datenblaetter/400000-424999/409984-an-01-ml-CONRAD_POF_HEIM_NETZWERK_STA_de_en_fr_nl.pdf
_______________________________________________ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless