*** olsr.org - 0.6.3-git_-hash_ *** Build date: 2012-12-20 18:58:10 on packages-8_3-i386.builders.pfsense.org http://www.olsr.org
Parsing file: "/var/etc/olsr.conf" Debug level: 2 IpVersion: 4 Clear screen enabled Config line 30: syntax error Error while reading config file /var/etc/olsr.conf! facendo un cat -n | grep 30 la riga interessata è 30 10.27.0.0/255.255.255.0 Hna4 { 10.27.0.0/255.255.255.0 0.0.0.0 0.0.0.0 } qui ho capito che non vuole la / ma uno spazio, di default inserisce anche 0.0.0.0 che indica la presenza di internet...ok! Il nuovo output è questo ############################################ *** olsr.org - 0.6.3-git_-hash_ *** Build date: 2012-12-20 18:58:10 on packages-8_3-i386.builders.pfsense.org http://www.olsr.org Parsing file: "/var/etc/olsr.conf" Debug level: 2 IpVersion: 4 Clear screen enabled HNA IPv4 entry: 10.27.0.0/255.255.255.0 HNA IPv4 entry: 0.0.0.0/0.0.0.0 Noint set to 1 IPC host: 127.0.0.1 Hysteresis disabled Link quality level 2 Pollrate 0.05 TC redundancy 2 MPR coverage 3 Plugin: /usr/local/lib/olsrd_httpinfo.so.0.1 Plugin param key:"port" val: "8069" Plugin param key:"Net" val: " " setting ifs_in_curr_cfg = 0 HELLO interval: 2.00 HELLO validity: 20.00 TC interval: 5.00 TC validity: 30.00 MID interval: 5.00 MID validity: 30.00 HNA interval: 5.00 HNA validity: 30.00 setting ifs_in_curr_cfg = 0 HELLO interval: 2.00 HELLO validity: 20.00 TC interval: 5.00 TC validity: 30.00 MID interval: 5.00 MID validity: 30.00 HNA interval: 5.00 HNA validity: 30.00 IPv4 broadcast/multicast : AUTO Mode : mesh IPv6 multicast : :: HELLO emission/validity : 2.00 (d)/20.00 (d) TC emission/validity : 5.00 (d)/30.00 (d) MID emission/validity : 5.00 (d)/30.00 (d) HNA emission/validity : 5.00 (d)/30.00 (d) Autodetect changes : no IPv4 broadcast/multicast : AUTO Mode : mesh IPv6 multicast : :: HELLO emission/validity : 2.00 (d)/20.00 (d) TC emission/validity : 5.00 (d)/30.00 (d) MID emission/validity : 5.00 (d)/30.00 (d) HNA emission/validity : 5.00 (d)/30.00 (d) Autodetect changes : no *** olsrd configuration *** Debug Level : 2 IpVersion : 4 No interfaces : ALLOWED TOS : 0xc0 OlsrPort : 698 RtTable : 0 RtTableDefault : 0 RtTableTunnel : 0 Willingness : 3 IPC connections : 0 Host 127.0.0.1 Pollrate : 0.05 NIC ChangPollrate: 2.50 TC redundancy : 2 MPR coverage : 3 LQ level : 2 LQ fish eye : 1 LQ aging factor : 0.050000 LQ algorithm name: default NAT threshold : 1.000000 Clear screen : yes Use niit : yes Smart Gateway : no SmGw. Allow NAT : yes SmGw. period : 10000 SmGw. stablecount: 6 SmGw. threshold : 0% Smart Gw. Uplink : both SmGw. Uplink NAT : yes Smart Gw. speed : 128 kbit/s up, 1024 kbit/s down # Smart Gw. prefix : ::/0 InterfaceDefaults: IPv4 broadcast/multicast : AUTO Mode : mesh IPv6 multicast : ff02::6d HELLO emission/validity : 2.00/20.00 TC emission/validity : 5.00/300.00 MID emission/validity : 5.00/300.00 HNA emission/validity : 5.00/300.00 Autodetect changes : yes dev: "rl2_vlan4" IPv4 broadcast/multicast : AUTO (d) Mode : mesh (d) IPv6 multicast : ff02::6d (d) HELLO emission/validity : 2.00/20.00 TC emission/validity : 5.00/30.00 MID emission/validity : 5.00/30.00 HNA emission/validity : 5.00/30.00 Autodetect changes : yes (d) dev: "rl2_vlan3" IPv4 broadcast/multicast : AUTO (d) Mode : mesh (d) IPv6 multicast : ff02::6d (d) HELLO emission/validity : 2.00/20.00 TC emission/validity : 5.00/30.00 MID emission/validity : 5.00/30.00 HNA emission/validity : 5.00/30.00 Autodetect changes : yes (d) Plugins: Name: "/usr/local/lib/olsrd_httpinfo.so.0.1" Not using hysteresis HNA4 entries: 0.0.0.0/0.0.0.0 10.27.0.0/255.255.255.0 Added 0.0.0.0 to IP deny set Added 127.0.0.1 to IP deny set ---- Interface configuration ---- Checking rl2_vlan4: Not a wireless interface Metric: 32 MTU - IPhdr: 1472 Index 10 Address:10.27.0.129 Netmask:255.255.255.128 Broadcast address:10.27.0.255 New main address: 10.27.0.129 Checking rl2_vlan3: Not a wireless interface Metric: 32 MTU - IPhdr: 1472 Index 11 Address:172.27.0.1 Netmask:255.255.255.0 Broadcast address:172.27.0.255 Using 'etx_ff' algorithm for lq calculation. TC: add entry 10.27.0.129 RIB: add prefix 10.27.0.129/32 from 10.27.0.129 ---------- LOADING LIBRARY /usr/local/lib/olsrd_httpinfo.so.0.1 ---------- Httpinfo olsrd plugin 0.1 by Andreas Tonnesen Checking plugin interface version: 5 - OK Trying to fetch plugin init function: OK Trying to fetch parameter table and it's size... Sending parameters... "Net"/" "... (HTTPINFO) unknown access restriction parameter: ! Il giorno 02 novembre 2014 02:04, Stefano De Carlo <stefana...@gmail.com> ha scritto: > Il 27 ottobre 2014 22:54, Michele Salerno <mikysa...@gmail.com> ha > scritto: > > Stefanauss, quella riga non l'ho trovata. > > Allego il file di che hai indicato. > > Premetto che è la versione di pfsense 2.1.5 ed il pacchetto di olsr è la > > versione 1.0.1 > > > > Ciao Michele, > > niente, non la trovi perchè (finalmente!) hanno fixato il bug. Quindi > non è quello il problema. > > Spulciando il thread ho notato che log dell'errore non ne hai postati. > Per far partire al boot OLSR su pfSense conviene avviarlo nel > "pfSense-way", lasciando che faccia le sue cose e semplicemente > moddando quello che serve. > > Fai cosi: > - Disabilita il tuo avvio manuale > - Configura pfSense da GUI con le opzioni che ti interessano > - Fai enable, e chiaramente non ti parte > - vai da terminale e manda > > olsrd -f /var/etc/olsr.conf > > e incolla qui in lista l'output. > È rilevante perchè in questo caso /var/etc/olsr.conf è il file > autogenerato da /usr/local/pkg/olsrd.inc, quindi l'output dovrebbe > contenere indizi sul problema che impedisce l'autoboot del demone. > > Stefanauss. > _______________________________________________ > Wireless mailing list > Wireless@ml.ninux.org > http://ml.ninux.org/mailman/listinfo/wireless > -- Informativa Privacy - Ai sensi del D. Lgs n. 196/2003 (Codice Privacy) si precisa che le informazioni contenute in questo messaggio sono riservate e ad uso esclusivo del destinatario. Qualora il messaggio in parola Le fosse pervenuto per errore, La preghiamo di eliminarlo senza copiarlo e di non inoltrarlo a terzi, dandocene gentilmente comunicazione. Grazie. Privacy Information - This message, for the D. Lgs n. 196/2003 (Privacy Code), may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation.
_______________________________________________ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless