qui ci sono le istruzioni per i modelli ubiquiti airmax http://wiki.openwrt.org/toh/ubiquiti/airmaxm io ti consiglio l'upload con curl o atftp come indicato alla pagina http://wiki.openwrt.org/doc/howto/generic.flashing.tftp#linuxbsd
saluti LP 2015-02-23 9:54 GMT+01:00 Alfredo Vania <iz7...@gmail.com>: > Buongiorno a tutti, > dopo diverse ore perse davanti al PC, chiedo aiuto alla community. > Sto tentando di flashare un Bullet M2 che mi ha portato Fabys questa > estate, che sembrava morto nella sua parte di alimentazione, ma che sono > riuscito a riparare con successo. > L'obiettivo è quello di caricare OPENWRT + nodogsplash per fare un hotspot > con una pagina che illustri, a chi prova a collegarsi, il mondo Ninux > italiano e nell'isola di Trani. > > Il primo step è proprio caricare OPENWRT, che a questo punto può anche non > essere il branch Scooreggione perchè non mi serve far girare olsrd > (configuro il bullet in routed). > Ho provato per prima la versione scaricata da > http://wiki.ubnt.com/Installing_OpenWRT_on_NanoStations/Bullets . > > Dopo diversi tentativi a vuoto via TFTP, e via WEBGUI, terminati entrambi > con con reject ancor prima di iniziare l'installazione, ho voluto insistere > entrando in ssh sul device. > Ho provato ad installare l'immagine sia con "fwupdate -m" che col comando > "ubntbox". > Vi allego i risultati: > > alfredo-Inspiron-6000 alfredo # scp openwrt-atheros-ubnt2- > squashfs.bin ubnt@192.168.1.20:/tmp/fwupdate.bin > ubnt@192.168.1.20's password: > openwrt-atheros-ubnt2-squashfs.bin 100% 2432KB 2.4MB/s > 00:01 > > alfredo-Inspiron-6000 alfredo # ssh -l ubnt 192.168.1.20 > ubnt@192.168.1.20's password: > > > BusyBox v1.11.2 (2011-04-29 17:41:29 EEST) built-in shell (ash) > Enter 'help' for a list of built-in commands. > > XM.v5.3.2# fwupdate -m > Invalid version 'XS2.ar2316.OpenWrt.r16278' > /usr/bin/fwupdate: Firmware update file check failed! > XM.v5.3.2# /sbin/ubntbox fwupdate.real -m /tmp/fwupdate.bin -d > Found mtd block: /dev/mtd0(u-boot) > Found mtd block: /dev/mtd1(u-boot-env) > Found mtd block: /dev/mtd2(kernel) > Found mtd block: /dev/mtd3(rootfs) > Found mtd block: /dev/mtd4(cfg) > Found mtd block: /dev/mtd5(EEPROM) > Got U-Boot variable: mtdparts = > mtdparts=mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),6528k(rootfs),256k(cfg),64k(EEPROM) > Adding U-Boot partition: u-boot 9F000000 00040000 > Adding U-Boot partition: u-boot-env 9F040000 00010000 > Adding U-Boot partition: kernel 9F050000 00100000 > Adding U-Boot partition: rootfs 9F150000 00660000 > Adding U-Boot partition: cfg 9F7B0000 00040000 > Adding U-Boot partition: EEPROM 9F7F0000 00010000 > Calculating flash size: > Adding block: /dev/mtd0("u-boot") - size: 00040000 > Adding block: /dev/mtd1("u-boot-env") - size: 00010000 > Adding block: /dev/mtd2("kernel") - size: 00100000 > Adding block: /dev/mtd3("rootfs") - size: 00660000 > Adding block: /dev/mtd4("cfg") - size: 00040000 > Adding block: /dev/mtd5("EEPROM") - size: 00010000 > Total flash size: 00800000 > Flash start: 9F000000 > Flash end: 9F800000 > Header MAGIC 'OPEN' > Current: XM.ar7240.v5.3.2.8909.110429.1745 > > New ver: XS2.ar2316.OpenWrt.r16278 > Versions: New(0) 0.0.0, Required(327680) 5.0.0 > Invalid version 'XS2.ar2316.OpenWrt.r16278' > XM.v5.3.2# > > Ho provato con diverse versioni di OPENWRT scaricate da > http://downloads.openwrt.org/ con stesso risultato. > Controllato MDsum ed è corretto. > Googleando un po' ho trovato https://dev.openwrt.org/ticket/10597 ma pare > che bisogna ricompilare openwrt...possibile che solo a me sia successo? > > Grazie a tutti anticipatamente per l'aiuto > Alfredo > > > _______________________________________________ > Wireless mailing list > Wireless@ml.ninux.org > http://ml.ninux.org/mailman/listinfo/wireless > > -- Luca Postregna Mob: (+39) 3381587782 luca.postre...@gmail.com http://luca.postregna.name https://twitter.com/lucapost
_______________________________________________ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless