So does anyone use any packet aggregation software to help keep a good throughput across there wireless network?
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Hendry Sent: 14 November 2005 23:06 To: 'WISPA General List' Subject: [WISPA] Packet Aggregation Because a lot of traffic crossing our network is in packets smaller than 1500 bytes I have been playing with Mikrotik's M3P to aggregate the smaller packets together. Throughput wise this seems to work very well and we see a big improvement on the amount of data we can pass over our wireless backhaul. The problem is that M3P adds about 15ms of delay in each direction so you are adding 30ms of delay to most none UDP streams. This is the amount of time that M3P waits to fill the 1500 byte. Does anyone know of an alternative system or open source software that does packet aggregation but is a little more configurable? Ideally I would like to be able to change the amount of time that the aggregator waits to fill it's payload and therefore reduce the overall delay. Cheers, P. -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.0/167 - Release Date: 11/11/2005 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.6/179 - Release Date: 23/11/2005 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/