All Motorola Canopy 900 mhz integrated units are Horizontal... Gino A. Villarini, Aeronet Wireless Broadband Corp. [EMAIL PROTECTED] www.aeronetpr.com 787.767.7466
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom DeReggi Sent: Thursday, December 01, 2005 6:28 AM To: WISPA General List Subject: Re: [WISPA] canopy >the integrated 900 units are horizontal Someone confirm this. I was under the impression all Canopy 900 integrated units were verticle also, and NOT hortizontal. Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: "Brian Rohrbacher" <[EMAIL PROTECTED]> To: "WISPA General List" <wireless@wispa.org> Sent: Thursday, December 01, 2005 12:00 AM Subject: Re: [WISPA] canopy > Ok, to clarify. Moto does NOT make Vertical integrated units for 900mhz? > All of moto's 900 gear is horizontal. > > > Next question. 900mhz sectors. I was at the double radius site looking > through antennas. This antenna > http://www.tiltek.com/final/pdfs/TA-926H-4-120.pdf > looks nice. What's the quality and price of it compared to other 900 > sectors? It costs $525 for 3. > With my setup, I am not looking for capacity, I am looking for maximum > coverage. Would 3 120* sectors cover and penetrate the same area as using > 6 60* integrated APs? Or is the coverage of the 60* not enough of an > improvement to justify the cost of 1 site with 6 antennas vs 2 sites with > 3 on each? I was thinking that the 60 x60 beam of the integrated units > cover more than the 120 x 19 of the sectors. And then there is the > gain..... > > Brian > G.Villarini wrote: > >>Wait a sec, you talking 900 mhz? the integrated 900 units are >>horizontal...both the ap and sm >> >>Gino A. Villarini, Aeronet Wireless Broadband Corp. >>[EMAIL PROTECTED] >>www.aeronetpr.com >>787.767.7466 >> >>-----Original Message----- >>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >>Behalf Of Brian Rohrbacher >>Sent: Thursday, December 01, 2005 12:36 AM >>To: WISPA General List >>Subject: Re: [WISPA] canopy >> >>Ok, then to go horizontal an external antenna is required. Which also >>means, one would never be able to use the Canopy integrated unit. >> >>Where do you Canopy users out there get your favorite 900 antennas at? >> >>G.Villarini wrote: >> >> >>>Nop, just vertical >>> >>>Gino A. Villarini, Aeronet Wireless Broadband Corp. >>>[EMAIL PROTECTED] >>>www.aeronetpr.com >>>787.767.7466 >>>-----Original Message----- >>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >>>Behalf Of Brian Rohrbacher >>>Sent: Thursday, December 01, 2005 12:22 AM >>>To: wireless@wispa.org >>>Subject: [WISPA] canopy >>> >>>is canopy horizontal and vertical like trango? Software switchable? >>> >>> > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.362 / Virus Database: 267.13.10/189 - Release Date: > 11/30/2005 > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/