Has anyone found another solution like a pc104+ board? There are a few newer/faster AMD CPU's than the 266MHz Geode in the WRAP board so I'd be surprised if there isn't a faster/stable generic x86 solution out there.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blair Davis Sent: 11 February 2006 01:44 To: WISPA General List Subject: Re: [WISPA] My Towers Need More CPU - suggestions? I'd like to see the NEMA boxes you are using. I have thought of putting an atx board on top of a grain leg but have not yet found a cost effective way to do it. Power supply is the main issue..... running 100W of power up there is not easy or cheap.... 48V @ 2.1A or 12V @ 8.2A. At 48V, not too bad, but at 12V that would be a big cable to run.... Dylan Oliver wrote: > Which "fancy enclosure with a heater and external fan" did you choose? > How much was it? Are you happy with it? > > Thanks, > -- > Dylan Oliver > Primaverity, LLC -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.4/255 - Release Date: 09/02/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.6/257 - Release Date: 10/02/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
