Get about 3 of these things and you should be fine. http://tranzeo.com/uploaded_images/117_10_5_TR-600f%20Series.pdf
Put ceiling omni's on them I would put one in the center of the building, and the remaining two towards the ends of the building. Kurt Fankhauser WAVELINC 114 S. Walnut St. Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Hensley Sent: Tuesday, February 14, 2006 4:59 PM To: WISPA General List Subject: [WISPA] Motel setup What's the currently recommended gear / setup for a motel? Total of 113 rooms spread over 2 floors. Going to be a 2-phrase project where the first group of rooms will have both Ethernet and Wi-Fi accessibility, with the remaining to have WiFi only. No idea yet on the layout of which rooms will be Ethernet / WiFi, but that's not really important. Owner is running the Ethernet cabling himself - just looking to contract out the Wireless end of it. I don't know much more than this at the moment. Not sure on square footage or anything - that is to come soon, but thought I'd get some ideas on equipment to start and then go from there. Thanks a bunch! -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.375 / Virus Database: 267.15.7/259 - Release Date: 2/13/2006 -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
