I have never soldered and have never had to replace a crimp in 5 years.
Perhaps I'm just good or lucky or a combination of both. LMR400/600.
Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Saturday, March 11, 2006 8:21 AM
Subject: [WISPA] Crimp or solder?
We've always terminated LMR 195/400/600 with solder on tips in the past.
Its a
real pain in the arse to do in many environments. Can anyone relate
experiences
with the crimp on tips? IS there any loss of reliability etc.?
Thanks,
Chris
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
