Hi Richard,
This cloaking mechanism is the 5MHz and 10MHz channel sizes that
George was referring to on the Star WAR boards. Works really well and even
seems to improve signal quality.
Cheers,
P.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Richard Goodin
Sent: 11 April 2006 08:09
To: wireless@wispa.org
Subject: Re: [WISPA] Best system for a new WISP
Guys;
These all sound great. I was reading just a couple months back about a
WISP
operator that had a severe problem. Just a few yards away, maybe 300 feet,
another guy put up his tower. I think they were both on 2.4 GHZ, and
someone suggested a different AP that would not even be detected by
conventional systems. Something about nonstandard bandwidth, channel
spacing or coding. I really feel that stealth is best here. These other
guys have been in business for a while and could cause trouble that I do
not
need.
Lee
Trango does make a good product. I still have 2 Sunstream AP's in use.
They
are like Timex watches.
I'm using Star War boards. A little bit more than the trango s. The 2
card
boards in a 5 gig rootenna let me use the 2nd card for an omni.
Speeds are about 20+ megs or so and I cloak down to 5MHz and 10MHz
channel
sizes.
One of the things I've been doing is slapping up repeaters all over the
place. Cheap as hell, about 400.00 or so.
Lately I've ran lmr400 into some of my customers attics and installed an
omni for their home wifi. We tend to service our customers right to the
pc
and it's a lot better router than a linksys. And I have happier customers
and I'm happier.
The 2 port and the 4 port both have dual ethernet as well.
Pretty versatile product. Lonnie has come along way with the new war
platform.
George
Travis Johnson wrote:
That's on quantity 30.... $149 each. 5.8ghz, dual polarity, up to 3
miles
(add $40 for a dish and it goes up to 13 miles) and delivers up to
10Mbps.
Hard to beat! And with SmartPolling on the AP, you can get hundreds of
customers per sector.
Travis
Microserv
Rick Smith wrote:
that's only quantity (large!) pricing isn't it ?
Brian Rohrbacher wrote:
If it's pretty absent of trees you might look at 5.8. Trango has that
cpe for $150. Not going to find any propriety gear cheaper.
Richard Goodin wrote:
I have been planning my WISP for about a year, and have yet to begin
delivery of bandwidth to customers. My choice for service delivery
was
802.11b, but with increased competition from other services nearby
(about 5 miles away) I am wondering how to avoid problems. I have a
50' tower, and it is ROHN 45g. My choice for antennas would be 4 90
degree horizontal antennas. I have looked at bandwidth and shopped
it
to death. My best price is $400 from Lime Light. And I've built a
couple of servers, acquired some switches and a router. The Router
is
a Cisco 1750.
My questions:
What CPE's and AP's would work best in this environment? I want to
keep interferance to a minimum, as well as control costs. My
environment includes lots of desert, and single story buildings.
Lee
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.4.1/307 - Release Date: 10/04/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.385 / Virus Database: 268.4.1/307 - Release Date: 10/04/2006
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
