Did you folks finally get some SR9s to test? How are your initial results????
On 5/18/06, Rick Smith <[EMAIL PROTECTED]> wrote:
Someone mentioned that in their testing TX was in a 10 mhz channel and RX was 5 MHZ (or however you set) Either way, it wasn't setting it for the same width baed on what you pick - i.e. it was 5/10 10/10 and 20/10mhz respectively. ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chris cooper Sent: Thursday, May 18, 2006 2:02 PM To: [EMAIL PROTECTED]; 'WISPA General List' Subject: RE: [WISPA] RouterBoard 112s Does anyone know how much of the band you take up as you raise the raw data rate on the SR9s? Ie, if I use 5 Mhz, what is the data rate, 10Mhz? Chris Cooper Intelliwave I will be trying them as soon as the SR9 cards arrive...... -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
