I see that now. I was then looking at the 532 but the spec sheet on the web does not list power consumption limits? Does anyone know if a RB532 and daughter card can handle 3 SR9's? Or a single RB 532 with 2 SR9's? I need to sectorize a pop with 3 120 sectors each into a SR9 and I want to stay as compact as possible.
Thanks, John Buwa Michiana Wireless > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of [EMAIL PROTECTED] > Sent: Saturday, September 23, 2006 7:56 AM > To: WISPA General List > Subject: Re: [WISPA] RB153 > > Onboard PSU is 10W max like the RB112. Board draws 3-4W that leaves 6-7W. > It shuld only be able to handle 1 SR9! > > ----- Original Message ----- > From: "JNA" <[EMAIL PROTECTED]> > To: "'WISPA General List'" <wireless@wispa.org> > Sent: Saturday, September 23, 2006 5:00 AM > Subject: [WISPA] RB153 > > > > Does anyone know if the RB153 will handle 3 SR9 cards both physical form > > factor and power consumption? > > > > Thanks, > > John Buwa > > Michiana Wireless > > > > -- > > WISPA Wireless List: wireless@wispa.org > > > > Subscribe/Unsubscribe: > > http://lists.wispa.org/mailman/listinfo/wireless > > > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/