>From what I heard on the MT lists, they are not compatible (have differend frequency ofsets).
----- Original Message ----- From: "Mark Nash - Lists" <[EMAIL PROTECTED]> To: "WISPA General List" <wireless@wispa.org> Sent: Friday, September 29, 2006 7:27 AM Subject: [WISPA] Mikrotik AP/Ubiquiti SR9 & Tranzeo CPE 900 MHz > Can't get an association from the Tranzeo 900 MHz CPE to the Mikrotik RB532 > with the SR9 card. > > I can associate with the Tranzeo 900 MHz AP immediately. > > The only thing that I see that could be causing the problem is the channel > table is off. > > The Ubiquiti card has this: > > 922 MHz > 917 MHz > 912 MHz > 907 MHz > > The Tranzeo AP shows this: > > 923 MHz > 918 MHz > 913 MHz > 908 MHz > > I've got them both set to 5 MHz channel widths. > > I've looked for a couple hours now and I can't see where to change the > frequency tables on either product (like you can on the Trango). > > Has anyone gotten this scenario to work? > > Mark Nash > Network Engineer > UnwiredOnline.Net > 350 Holly Street > Junction City, OR 97448 > http://www.uwol.net > 541-998-5555 > 541-998-5599 fax > > > > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/