Even if the Second radio was turned off, it would still receive the signal
from the other radio, if their was a physical connection/circuit in place.
Without attennuators in line, I'd assume that over time you'd eventually
blow the receiver of the other radio even if it was off. Also possibly some
sort of negative effects relating to impedience.
I'm wondering why you want to do this?
If it is for redundancy, well antennas and cables also fail, so it would be
pointless to share cable for redundancy. If for Duplexing two radios on one
link, well both would have to be on at the same time, which is why they make
Dual Pol/feed antennas.
Tom DeReggi
RapidDSL & Wireless, Inc
IntAirNet- Fixed Wireless Broadband
----- Original Message -----
From: "Blair Davis" <[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Thursday, October 05, 2006 9:14 PM
Subject: Re: [WISPA] lmr 400 splitter
Not a good idea.......
Brian Rohrbacher wrote:
I want to go from two cards to one antenna (wouldn't both be on at same
time).. I guess I want a y, to go from 2 n male to 1 n female.
Brian
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.407 / Virus Database: 268.12.13/463 - Release Date: 10/4/2006
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/