The SNMP interface you can get for it. Web/telnet/ssh/snmp interface. I love the one from APC. I can reboot a tower site from my blackberry!
Mark Nash Network Engineer UnwiredOnline.Net 350 Holly Street Junction City, OR 97448 http://www.uwol.net 541-998-5555 541-998-5599 fax ----- Original Message ----- From: "Brian Rohrbacher" <[EMAIL PROTECTED]> To: "WISPA General List" <wireless@wispa.org> Sent: Wednesday, November 15, 2006 9:28 AM Subject: Re: [WISPA] External battery on UPS > What is used to tell you how much runtime is left? Have you found it > accurate? > > Brian > > Travis Johnson wrote: > > > We tried the $65 deep cycle marine batteries from Walmart. They worked > > OK, but the best batteries we have found so far are the gel deep cycle > > that are used in very large UPS systems. They weigh 110 pounds each > > and are rated at 120 amp/hour and they do that for sure. > > > > We actually have a site out of power right now that has been running > > on two of those batteries for 14+ hours so far and still shows another > > 8 hours remaining. This is with three wireless radios, an HP 24 port > > switch and a power rebooter all running off it. :) > > > > Travis > > Microserv > > > > Mark Nash - Lists wrote: > > > >> Ah-hah! I'll give this a try. Unfortunately the batteries I want to > >> use are $200 each. ;) Got a recommendation on batteries that will > >> last with constantly being charged by the UPS? > >> > >> Mark Nash > >> Network Engineer > >> UnwiredOnline.Net > >> 350 Holly Street > >> Junction City, OR 97448 > >> http://www.uwol.net > >> 541-998-5555 > >> 541-998-5599 fax > >> ----- Original Message ----- From: "Travis Johnson" <[EMAIL PROTECTED]> > >> To: "WISPA General List" <wireless@wispa.org> > >> Sent: Wednesday, November 15, 2006 6:13 AM > >> Subject: Re: [WISPA] External battery on UPS > >> > >> > >>> You can't use just 1 battery. The APC units want to see 24vdc, so > >>> you need two batteries running in series. > >>> > >>> It works perfectly, as I have 20+ remote locations running off two > >>> gel type batteries. Make sure you install some type of a fuse on the > >>> positive side of the connection. > >>> > >>> Travis > >>> Microserv > >>> > >>> Mark Nash - Lists wrote: > >>> > >>>> I believe I remember some discussion on this list on connecting an > >>>> external battery to an APC UPS. I'm in the middle of doing it > >>>> right now and am having problems. The UPS just beep continuously > >>>> with the 'bad battery' light on. I'm using a Lifeline deep cycle > >>>> battery. Any ideas? > >>>> > >>>> Mark Nash > >>>> Network Engineer > >>>> UnwiredOnline.Net > >>>> 350 Holly Street > >>>> Junction City, OR 97448 > >>>> http://www.uwol.net > >>>> 541-998-5555 > >>>> 541-998-5599 fax > >>>> > >>>> > >>> -- > >>> WISPA Wireless List: wireless@wispa.org > >>> > >>> Subscribe/Unsubscribe: > >>> http://lists.wispa.org/mailman/listinfo/wireless > >>> > >>> Archives: http://lists.wispa.org/pipermail/wireless/ > >>> > >> > >> > >> > -- > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
