I would LOVE to buy some and test this solution... as I don't believe
that will fix the problem with the RB532's. The reason I say this is the
problem is actually WORSE when you use just the regular 48V power supply
(not PoE) and don't even plug an ethernet cable into the board at all.
The noise is coming directly off the board.
If someone wants to send me some, I can easily test it. I'll even pay
for them and shipping.
Travis
Microserv
John Scrivner wrote:
Many outside radios suffer from RF radiation over the Ethernet. I have
personally seen this on the YDI Etherant and the Trango FOX. This
problem is not specific to any one manufacturer. The cable acts as a
transmit antenna, carrying the clock signals from internally to the
outside. This can be largely corrected with the use of ferrite beads
at the radio and POE injector on these radios. This is a low cost fix
in many cases and I have personally seen a 16 db improvement in noise
elimination using this approach. Just Google "ferrite beads" and I am
sure you will find suppliers. I do not remember where we got ours but
they were very inexpensive. I think we paid less than a dollar a piece
for these. They are literally a snap to install. They snap together
over the Ethernet wire. It takes seconds to install.
Scriv
Rick Smith wrote:
I had the same problem with some canopy access points - had to do with
Ethernet.
I put an AP up on a tower, and it interfered with a HAM radio guy.
Once I
moved it down on the tower 20 feet, the problem went away. I put a 532
right next to that HAM'r and nothing happened, I've got a nice 5.8
gig feed
and a 2.4 repeater there now...
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Travis Johnson
Sent: Saturday, December 02, 2006 10:30 AM
To: WISPA General List
Subject: Re: [WISPA] 900 Mhz Mikrotik SR9 Clients
There is a HUGE problem with Mikrotik and FCC certification. The
Mikrotik
532 puts out over 30db of constant "noise" in an area they should not be
(150MHz and 400MHz). It's still an issue, and has not been fixed or even
addressed by MT.
Travis
Microserv
Butch Evans wrote:
On Fri, 1 Dec 2006, Patrick Leary wrote:
Why do you have to have the router? The DSL and cable guys don't
provide routers (not without extra fees). I provide my own in my
home. At work we have our own router.
I provide a router because that is the best network design and it
offers ME an upgrade path that is beyond just being a provider of a
COMMODITY service (transport). You don't have to agree with it,
others don't have to do it, but "them's the facts".
VL also can do VLAN, all the way to QinQ 802.3ad VLANs. It does
<SNIPPED LOTA OF "NON MARKETING GOOP">
that's not marketing goop, it's been tested by a tier 1 operator
and it blew them away.)
Wow. As I said in the first post, I have nothing bad to say about
Alvarion gear...(please read the last paragraph)
Plus, in the end the thing that I admit really gets me is that some
of these products simply are not legal at all and are illegally
shipped in from overseas. If we just blatantly flauted the laws we
could save tons in R&D and legal too. It has always been
disappointing that some WISPs simply don't care about that.
Especially when at the same time the same WISP might complain that
another WISP is over driving a system.
This is a problem, but not so much of a problem as you make it out
to be. I realize the law is "black and white", but the reality is a
little more like "shades of grey". I'm not supporting anyone
breaking the law, but the truth of the matter is that there IS a
difference between operating a system that is not certified within
legal limits and operating a system that operates outside legal
power limits. The primary difference is that one of these (you get
to pick) will cause more harm to the usability of the spectrum than
the other.
On another subject, take another look at the subject line...It's not
about Alvarion gear, but you seem to have stepped into the middle of
it (once again). I really just wish you'd at least have the
courtesy to change the subject line if you are going to change the
subject.
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/