My experience is showing about a max of 240 Mbps aggregate bandwidth for a link that long. My shortest link is about a quarter mile and is getting 283 Mbps.
Rick Harnish President OnlyInternet Broadband & Wireless, Inc. 260-827-2482 Founding Member of WISPA -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Liotta Sent: Tuesday, December 12, 2006 2:18 PM To: WISPA General List Subject: Re: [WISPA] high throughput backhaul options Tim Kerns wrote: > The Orthagon 600 series is supposed to do 300 mb on a 30 Mhz channel. > I believe they do this using both vert and hor polarity. Is this the > system you are out growing? > First of all, 300Mbps is an aggregate figure. Second, in a low latency deployment at 5-10 miles it is not possible to get full throughput on an Orthogon. -Matt -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/