Ihave never check the real speed but the radio it is a G so it must be
more than that
Marlon K. Schafer (509) 982-2181 escribió:
11 megs like your Cisco radios claim (then actually do half or less
than that) or a real 11 meg?
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) And I run my own wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----- Original Message ----- From: "Carlos A. Garcia G"
<[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Tuesday, December 12, 2006 10:33 AM
Subject: Re: [WISPA] Need opinion
reliability its the primary concern and the speed of the link its
enough starting with 11Mbps
Marlon K. Schafer (509) 982-2181 escribió:
Hi Carlos
You don't tell us what speed and/or reliability you need for that link.
I tried the single radio repeater idea you are talking about. The
results pretty well sucked. big time.
However, I'm about to try it again with a protocol called wds.
That's supposed to allow an ap work as both an ap and a client radio
at the same time. It's supposed to do what you are asking. I'm
sure that there will be a speed penalty though, hopefully just much
less than it was last time I tried this.
You'd end up with ap/noc<-->ap/wds<-->cpe/office
We've got a person that we're about to install, he is the ONLY one
that sees another customer that's wanted service for years. I'm
going ot use a Tranzeo AP with a Teletronics splitter and a pair of
Maxrad antennas. The backhaul to the main tower will be done with
vertical and the one to the remote site will be horizontal.
Having said all of that, you really should use 4 radios to do this.
It'll be faster and more stable. Radios don't like to store and
forward out one port. They like to rec. on one and tx on the other
basically at the same time.
Wish us both luck!
Marlon
(509) 982-2181 Equipment sales
(408) 907-6910 (Vonage) Consulting services
42846865 (icq) And I run my own
wisp!
64.146.146.12 (net meeting)
www.odessaoffice.com/wireless
www.odessaoffice.com/marlon/cam
----- Original Message ----- From: "Carlos A. Garcia G"
<[EMAIL PROTECTED]>
To: "WISPA General List" <wireless@wispa.org>
Sent: Monday, December 11, 2006 3:49 PM
Subject: [WISPA] Need opinion
Hi i have a problem i need to establish a wireless link betwen my
ofice and another ofice there are a hill betwen so what equipment
or vendors do i have to contact: look!
NOC <-->> POP <-->> OFFICE
????
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/