Were looking at putting some gear (MT) up a 300 ft tower where the temps
can hit -40 (with out the wind). As some of the equipment is not rated
for these temps and we don't want to test them out either (tower
climbing at that temp is a bitch), we are looking at a small heated
enclosure. We can heat it at 48v and use the POE cable (any lower
voltage and the current is to high for the wire pairs at those
distances) or run some armored BX up the tower for 120vac. My concern
is lighting or other discharges and frying the equipment at either end.
What are the risks and would grounding the BX every 100ft (as per rules
with coax) be enough to protect the equipment? Any feed back would be
great.
Erik
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/