Right, I used a pair of 5 gig rootennas recently for a 10 mile shot with
a pair of cm9's
The tower was the smaller 5 gig rootenna and the cpe was the larger.
5.8 10.00 miles :
xxxxxxx 46:xx xx.5 100 -65 -65 48 54
The large one is the same as the 900 you got.
I would use 2 large ones and be very happy.
George
Travis Johnson wrote:
Hi,
PacWireless makes a 19db and 24db flat panel 5.8ghz antenna. Or there
are the Rootenna's, depending on what you are using for radios. I have
used all four types and they all work as advertised.
Travis
Microserv
Mark Nash wrote:
I'm switching POPs and need to put in a high-capacity, redundant link.
Here's the application...
1. I'm securing a roof lease and the building owner will care about
asthetics (the smaller and better-looking, the better).
2. I can put up to a maximum of 4 antennas on the building and they
want to agree on what antennas I use.
3. I'll have 10mbps now but it should scale to something
higher...maybe put in a cheaper solution now but upgrade later without
changing the antennas (just change the radios/boards).
4. The link will be 12 miles, 8-story building on one side on the
valley floor to a 120-foot tower about 300 feet off the valley floor.
5. Mounting will be on the side of the building.
Got suggestions on 5.8GHz antennas for this application?
Thanks,
Mark Nash
Network Engineer
UnwiredOnline.Net
350 Holly Street
Junction City, OR 97448
http://www.uwol.net
541-998-5555
541-998-5599 fax
--
George Rogato
Welcome to WISPA
www.wispa.org
http://signup.wispa.org/
--
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
