Sounds about right, the other thing with higher noise levels is that you will have packet loss. You can still have good throughput but you will have packet loss.
Chadd > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Smith, Rick > Sent: Friday, April 13, 2007 10:40 AM > To: [EMAIL PROTECTED]; WISPA General List > Subject: RE: [WISPA] Trango 900 > > depending on noise floor, we get anywhere from 1 to 2.7 meg. > > Highest I've EVER seen was 2.85 mbps - 2 miles out, with -59 signal. > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of chris cooper > Sent: Friday, April 13, 2007 11:21 AM > To: 'WISPA General List' > Subject: [WISPA] Trango 900 > > > What is the non-vendor speak, actual production max throughput on a > Trango 900 Mhz AP? > > Thanks > Chris > > -- > WISPA Wireless List: [EMAIL PROTECTED] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- > WISPA Wireless List: [EMAIL PROTECTED] > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -- WISPA Wireless List: [EMAIL PROTECTED] Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
