Can you give us a round about price for what this thing cost you and perhaps where you bought it?
Thanks! ryan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Rogers Sent: Friday, May 25, 2007 7:38 PM To: WISPA General List Subject: RE: [WISPA] Free Standing Towers I just put up a Nello tower that is 190' tall. It is similar to a Rohn SSV, but I got better wind-loading compared to any of the others. Mine has a 3 1/2' face at the top, and can withstand about 110ft^2 of surface area. I would definitely recommend it. I was a bit leery of the hollow legs. Hollow towers rust from the inside out, and you can't usually tell until it is too late. This is electro-galvanized, so it is plated well. Only time will tell. I can send pictures if you would like. Eric Rogers Precision Data Solutions, LLC (317) 831-3000 x200 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kelly Shaw Sent: Friday, May 25, 2007 10:21 AM To: 'WISPA General List' Subject: [WISPA] Free Standing Towers Folks, I'm looking for a good free-standing tower. I need to be able to choose between 150' and 190' and it needs to be able to handle your typical WISP needs. I already know about the Trylon SuperTitan and while they seem to serve the purpose, they are really hard to maneuver around on when you get to the top. What are you guys using for free-standing towers at these heights? Kelly Shaw Pure Internet -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
