One method if the conduit is empty is to attach a light pull string to a ping pong ball and then to suck it through with a vacuum on the conduit from the opposite end as the ping pong ball. This of course assumes the conduit is tight sealed.
* Larry A. Weidig ([EMAIL PROTECTED]) * Excel.Net,Inc. - http://www.excel.net/ * (920) 452-0455 - Sheboygan/Plymouth area * (888) 489-9995 - Other areas, toll-free -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Hammett Sent: Tuesday, August 14, 2007 2:38 PM To: WISPA List Subject: [WISPA] Conduits So one has a long piece of conduit (150'). How would I get wires and the pull string through the conduit in the first place? ----- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com ------------------------------------------------------------------------ -------- WISPA Wants You! Join today! http://signup.wispa.org/ ------------------------------------------------------------------------ -------- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- -- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
