Just make sure you use the factory stripper. That little tool saves a LOT of time! Oh yeah, make sure you use the deburring tool. That's especially important on the EZ connectors.
marlon ----- Original Message ----- From: "Luke Pack" <[EMAIL PROTECTED]> To: "WISPA General List" <wireless@wispa.org> Sent: Thursday, February 07, 2008 5:40 AM Subject: Re: [WISPA] EZ Times Connectors > Though I am trying to eliminate the need for LMR runs these days, we've > used > the EZ-400 and 600 for quite some time. They are "EZ" and they work great > as mentioned. > > - Luke > > ----- Original Message ----- > From: "Blair Davis" <[EMAIL PROTECTED]> > To: "WISPA General List" <wireless@wispa.org> > Sent: Wednesday, February 06, 2008 11:46 PM > Subject: Re: [WISPA] EZ Times Connectors > > >>I switched to the ez-400 a few months ago. >> >> They are great! >> >> Blair >> >> Marlon K. Schafer wrote: >>> We just use the ez-400-nmh. Captive pin, no crimp or solder on the >>> center >>> pin. Just crimp the outside ring. >>> >>> I've also gotten some of the new screw together ones, no crimp at all >>> needed. I'll see how it goes. >>> marlon >>> >>> ----- Original Message ----- >>> From: "Tom DeReggi" <[EMAIL PROTECTED]> >>> To: "WISPA General List" <wireless@wispa.org> >>> Sent: Wednesday, February 06, 2008 4:46 PM >>> Subject: [WISPA] EZ Times Connectors >>> >>> >>> >>>> I was going to try out the Times EZ style connectors for LMR400. >>>> I saw several part numbers, Specifically... >>>> >>>> EZ-400-NMH-D >>>> EZ-400-NMK >>>> >>>> They were referenced as "spring tipped" versus "captived" or something >>>> like >>>> that. >>>> >>>> Anyone know the difference? What are preferred to use? >>>> >>>> Tom DeReggi >>>> RapidDSL & Wireless, Inc >>>> IntAirNet- Fixed Wireless Broadband >>>> >>>> >>>> >>>> -------------------------------------------------------------------------------- >>>> WISPA Wants You! Join today! >>>> http://signup.wispa.org/ >>>> -------------------------------------------------------------------------------- >>>> >>>> WISPA Wireless List: wireless@wispa.org >>>> >>>> Subscribe/Unsubscribe: >>>> http://lists.wispa.org/mailman/listinfo/wireless >>>> >>>> Archives: http://lists.wispa.org/pipermail/wireless/ >>>> >>> >>> >>> >>> -------------------------------------------------------------------------------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> -------------------------------------------------------------------------------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
