Nope, just daiy chain the radios together: Power Supply -> Up the tower -> radio1 portA -> radio 1 portB -> radio 2 portA.
If you need another weather resistant "gland" you can buy one, or just drill a quick hole and put in a water proof wire fitting from our local electrical shop. Port A - Port B on the radios is a switch. ryan On Aug 28, 2008, at 4:47 PM, 3-dB Networks wrote: > Forgive my Tranzeo ignorance, but I don't work with the radios often > (by > choice ;-) > > > > I have been asked to help setup two point to point links, with a > tower in > between two buildings to serve as a repeater. The equipment has > already > been bought, so I am stuck with what I have. > > > > Since the repeater site is only a relay, can I simply daisy chain > the two > radios together? Will they share data like this, that way I do not > need to > install two CAT5 cables on the tower and a switch (I do realize I > will need > to use the 24V power supply instead of the 18V). > > > > Thanks for the help in advance > > Daniel White > 3-dB Networks > > > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
