I've seen this happen in the past. Do you have a sync cable plugged into the sync port? Have you tried upgrading firmware?
-Eric WISP wrote: > I had to reboot one of my towers tonight and when the access point came back > with "Default plug overrides configured parameters" > Since this P10 AP has been up for 7 months, and rebooted 20 times or so and > no tower climbs, I am fairly certain that it doesn't have a default plug in > it. > > Has anyone ever seen this and if so, is there any fix. > My awesome motorola support guy told me after my description of it says the > default plug is in was to replace the unit. Is there any way to have the ap > ignore the default plug temporarily so that I can have it working until I can > get up the tower. > > thanks, > Cliff > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
