I saw the same results a month ago when I bought a few of the EOC-2610. Make sure you're using the latest firmware.
http://www.engeniustech.com/datacom/products/resources.aspx?cat=7&ID=246 That problem went away after I flashed them, and they work great. Pat Blair Davis wrote: > Some interesting results from a side by side comparison of these radios... > > ubquity NS2 > firmware XS2.ar2316.v3.1.1.3498.080725.1324 > ap sees radio at -77 > radio sees ap at -76 > > EnGenius EOC-2610 > firmware 1.0.30 > ap sees radio at -76 > radio sees ap at -89 > > Transfer rates are within 5% of each other > Error rate is within 1% > > a couple of older radios I had on hand, hooked to an 9db patch, > mounted in the same place as the NS2/EOC-2610, reported rssi values > within 3 db or the NS2. > > Looks like the reported rssi on the EOC-2610 is off quite a bit..... > > Comments? > > Blair > ------------------------------------------------------------------------ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
