I can't believe no-body asked this question. I was running Nstream on 3 of the backhauls. Turned that off and CPU usage has dropped dramatically and is now hanging around 10-15% consistent. Pings times are much better going through this now. 2-3ms.
Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -----Original Message----- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Monday, April 20, 2009 2:50 PM To: 'WISPA General List' Subject: [WISPA] is this router overloaded? I have a RB600 here that I've taken a screenshot of. No interfaces are bridged, everything is routed and I'm noticing some lag in the traffic that passes though this device during peak use. I suspect that the 41 RIP routes might have something to do with it as actual throughput isn't that much sometimes topping out around 8Mbps. Just want to hear from others and if there is any suggestions on how I might speed this up let me know. CPU usage on it is around 40-50%. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 www.wavelinc.com -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/