Yep, unless it isn't 24V equipment. :) Kevin Neal wrote: > So..what about this...get an adjustable voltage power supply. Install the > RG6 or whatever coax/wire would handle the load/distance. Adjust the > voltage with a meter up top so that you have ~24-28v at your equipment? > > -Kevin > > > -----Original Message----- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of David Hulsebus > Sent: Friday, May 08, 2009 2:59 PM > To: WISPA General List > Subject: Re: [WISPA] Fiber/Copper Combo Wire > > Ive used RG8 coax in the past to deliver 24V DC to about 600ft, but not at > 1500ft. RG6 has significantly less loss over distance than 24AWG wire. > > Dave Hulsebus > > Scott Reed wrote: > >> Belden makes this, but I don't have a number for it. >> >> I would be really cautious if they are running 1500' single run for >> POE. Need to do the voltage loss calculation to be sure to use the >> correct power supply. >> >> Jeff Broadwick wrote: >> >> >>> >>> Hi All, >>> >>> One of my customers is looking for these critters for a 1500 foot tower. >>> Gig fiber for the data, copper for POE. >>> >>> Any ideas? >>> >>> Regards, >>> >>> Jeff >>> ImageStream >>> >>> >>> >>> --------------------------------------------------------------------- >>> ----------- >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> --------------------------------------------------------------------- >>> ----------- >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> --------------------------------------------------------------------- >>> --- >>> >>> >>> No virus found in this incoming message. >>> Checked by AVG - www.avg.com >>> Version: 8.5.325 / Virus Database: 270.12.21/2104 - Release Date: >>> 05/08/09 06:34:00 >>> >>> >>> >>> >> >> > > > ---------------------------------------------------------------------------- > ---- > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---------------------------------------------------------------------------- > ---- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.325 / Virus Database: 270.12.21/2104 - Release Date: 05/08/09 > 06:34:00 > >
-- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/