A virtual AP is another interface, so unless its bridged with something else, it will have to have an IP to communicate!
* ----------------------------------------------------------- Dennis Burgess, CCNA, A+, Mikrotik Certified Trainer WISPA Board Member - wispa.org <http://www.wispa.org/> Link Technologies, Inc -- Mikrotik & WISP Support Services WISPA Vendor Member* *Office*: 314-735-0270 *Website*: http://www.linktechs.net <http://www.linktechs.net/> */ LIVE On-Line Mikrotik Training <http://www.onlinemikrotiktraining.com>/* The information transmitted (including attachments) is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is intended only for the person(s) or entity/entities to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient(s) is prohibited, If you received this in error, please contact the sender and delete the material from any computer. Scott Reed wrote: > I have tried to setup OSPF on a Virtual AP in 2.9.49. I have not found > a way to get it to forward the route. As soon as I put the address on > the physical interface, the route propagates. Any one know if this can > be made to work? > > If I upgrade to 3.23 or higher will it work? > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/