Sorry, 1. Power-off the AN-80i PoE power adapter. Remove the network Ethernet cable and connect your computer directly to the PoE power adapter 'INPUT' (Ethernet port requires Cat 5e cross-over cable).
2. Open a command prompt window on the PC and enter the command: telnet 192.168.25.2 <Do not press Enter key at this time> 3. Power-on the AN-80i PoE power adapter for over 30 seconds. 4. Power-off the AN-80i PoE power adapter for 7 seconds. 5. Power-on the AN-80i PoE power adapter, wait 15 seconds, and then press the Enter key on the PC (to start the Telnet session). The Telnet session must connect to the AN-80i within 10 to 30 seconds from when the AN-80i starts the second time. 6. When prompted, login using 'admin' as the user name and 'admin' as password. 7. Use the following commands to save a new IP address: ipaddr <IP Address> <Enter> save config <Enter> If required, use the 'user' command to enter new username and password information or the 'save' command to reset all parameters to factory default settings. 8. Power-off the AN-80i, restore the network connections, and restore power Joe Laura wrote: > Couldnt get to that link. Says Your support portal session has expired > ----- Original Message ----- > From: "Eric Muehleisen" <ericm...@gmail.com> > To: "WISPA General List" <wireless@wispa.org> > Sent: Sunday, July 26, 2009 9:17 PM > Subject: Re: [WISPA] Default a AN80i? > > > > http://supportcenteronline.com/ics/support/KBAnswer.asp?questionID=377&fieldOffset=14&hitOffset=709+20+ > >> Joe Laura wrote: >> >>> Does anyone know how to default an AN80i Redline? Joe Laura >>> ----- Original Message ----- >>> >>> >>> >> -------------------------------------------------------------------------- >> > ------ > >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >> -------------------------------------------------------------------------- >> > ------ > >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >> >> -------------------------------------------------------------------------- >> > ------ > >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------- >> > ------ > >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > ---------------------------------------------------------------------------- > ---- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.392 / Virus Database: 270.13.31/2264 - Release Date: 07/26/09 > 11:07:00 > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
