We had a problem during storms with one link where the link would show as up but wouldn't pass traffic. Turned out to be a mis-matched ODU firmware. 2.3.9 doesn't auto rateshift back up but was pretty stable. 2.4.0 can have the interface lock up but still pass traffic. 2.4.1 doesn't have the interface lock up but it loses the auto rateshift back up.
So, check your firmware and make sure it has the same version on both sides. We had an Apex link that wouldn't pass traffic if we upgraded one side and not the other. So, it seems very critical to have everything identical on both ends. On Thu, Sep 3, 2009 at 8:09 AM, Kevin Lamothe<klamo...@vianet.ca> wrote: > Has anyone had any experience with this product? > > We have the latest firmware from Trango and are still experiencing the > same problem. > > After being online for a few weeks, our link starts to get packet loss > then it won't transfer any traffic at all without a power cycle of both > ends, the odd thing is that there's still a link between the two microwaves. > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
