I havent seen that but I've only got a few StarOS CPE units out there.
What version are you running? I'm still on V2 for Customer APs. Just
started upgrading to V3 for Backhauls. -RickG

On Thu, Sep 3, 2009 at 5:35 PM, reader<rea...@muddyfrogwater.us> wrote:
> I, too, run Star-OS, and the bullet 2's are approximately 50% of the
> throughput of a staros based cpe when in 11b mode.
>
> Star-OS has other helpful things like managed mode,  and the signal level
> settings.  I use bullet 2's only when I absolutely have to, due to this.
>
> Star-OS ap to cpe will endure high levels of interference and multipath,
> without packet loss, but not a bullet.
>
>
>
> On Wed, 2 Sep 2009 20:32:28 -0400, RickG wrote
>> Mark,
>>
>> It appears that is correct. I also run StarOS AP's. Interesting
>> though, I have not seen any performance differences between the units
>> with ff & comp and those that dont support it. I wonder if its just
>> something you cant view?
>>
>> -RickG
>>
>> On Wed, Sep 2, 2009 at 3:35 PM, Mark Nash<markl...@uwol.net> wrote:
>> > According to Ubiquiti, these DO support ff & comp:
>> >
>> > Nanostation 5
>> > Nanostation Loco 5
>> > Bullet 2 HP
>> > Picostation 2 HP
>> > All powerstations
>> >
>> > All others do not, including:
>> >
>> > Nanostation 2
>> > Nanostation Loco 2
>> > Bullet 2 (non-HP...WTF???)
>> > Bullet5
>> >
>> > Mark Nash
>> > UnwiredWest
>> > 78 Centennial Loop
>> > Suite E
>> > Eugene, OR 97401
>> > 541-998-5555
>> > 541-998-5599 fax
>> > http://www.unwiredwest.com
>> > ----- Original Message -----
>> > From: "ralph" <ralphli...@bsrg.org>
>> > To: "'WISPA General List'" <wireless@wispa.org>
>> > Sent: Wednesday, September 02, 2009 11:36 AM
>> > Subject: Re: [WISPA] Ubiquiti CPEs - SuperAG
>> >
>> >
>> >>I know that with DDWRT, you have to pay for the license and you get a key.
>> >> Not sure about OpenWRT.
>> >> I don't recall any current UBNT I have used that did not support ff and
>> >> comp. I have used most, except for the newest that just came out.
>> >>
>> >> Ralph
>> >>
>> >> -----Original Message-----
>> >> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>> >> Behalf Of Mark Nash
>> >> Sent: Wednesday, September 02, 2009 12:43 PM
>> >> To: WISPA General List
>> >> Subject: [WISPA] Ubiquiti CPEs - SuperAG
>> >>
>> >> It appears that only SOME of the Ubiquiti products enable compression &
>> >> fast
>> >> frames, & some don't.  Is this accurate?  Any success stories using the
>> >> WRT
>> >> firmware on these products?
>> >>
>> >> It seems that the hardware is capable, just hasn't been enabled in the
>> >> firmware unless you purchase the higher end, more expensive products.
>> >>
>> >> This seems to be the ONLY thing keeping me from using these products in a
>> >> big way as opposed to what I use now, StarOS.
>> >>
>> >> Mark Nash
>> >> UnwiredWest
>> >> 78 Centennial Loop
>> >> Suite E
>> >> Eugene, OR 97401
>> >> 541-998-5555
>> >> 541-998-5599 fax
>> >> http://www.unwiredwest.com
>> >>
>> >>
>> >> -------------------------------------------------------------------------
> ---
>> >> ----
>> >> WISPA Wants You! Join today!
>> >> http://signup.wispa.org/
>> >> -------------------------------------------------------------------------
> ---
>> >> ----
>> >>
>> >> WISPA Wireless List: wireless@wispa.org
>> >>
>> >> Subscribe/Unsubscribe:
>> >> http://lists.wispa.org/mailman/listinfo/wireless
>> >>
>> >> Archives: http://lists.wispa.org/pipermail/wireless/
>> >>
>> >>
>> >>
>> >> -------------------------------------------------------------------------
> -------
>> >> WISPA Wants You! Join today!
>> >> http://signup.wispa.org/
>> >> -------------------------------------------------------------------------
> -------
>> >>
>> >> WISPA Wireless List: wireless@wispa.org
>> >>
>> >> Subscribe/Unsubscribe:
>> >> http://lists.wispa.org/mailman/listinfo/wireless
>> >>
>> >> Archives: http://lists.wispa.org/pipermail/wireless/
>> >>
>> >
>> >
>> >
>> > --------------------------------------------------------------------------
> ------
>> > WISPA Wants You! Join today!
>> > http://signup.wispa.org/
>> > --------------------------------------------------------------------------
> ------
>> >
>> > WISPA Wireless List: wireless@wispa.org
>> >
>> > Subscribe/Unsubscribe:
>> > http://lists.wispa.org/mailman/listinfo/wireless
>> >
>> > Archives: http://lists.wispa.org/pipermail/wireless/
>> >
>>
>> ----------------------------------------------------------------------------
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> ----------------------------------------------------------------------------
> ----
>>
>> WISPA Wireless List: wireless@wispa.org
>>
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>>
>> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
> --
> Open WebMail Project (http://openwebmail.org)
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to