Sounds like a duplex mismatch to me. Are both ends set to auto-negotiate and 
have they both negotiated 100mb/full? Have you checked for errors or discards 
on the interfaces at either end?

-----Original Message-----
From: sa...@michianawireless.com [mailto:sa...@michianawireless.com] 
Sent: 24 September 2009 17:51
To: WISPA General List
Subject: [WISPA] Mikrotik Weirdness!?

Ok,

Im going bonkers. We are getting ping drops from our Mikrotik devices to the 
other. Our main router is PC based with one of those 4 port RB cards in it. 
Starting the other day out of the blue the net started acting funky and we were 
getting large pauses. So I started pinging. Get ping loss from the main router 
to everything. 

average pps going through the router 585 and transfers around 4m at the moment. 

We switched out the pc and even used an integrated ethernet port on the new pc 
to check connectivity to the other devices via means other than the RB 4 port 
ethernet card to make sure that wasnt going bad. But no improvement STILL 
getting pings loss. Switched cables. STILL. Latest OS. Now here is the wierd 
part I do not get.

We have our backhaul radio connected directly to the onboard ethernet port on 
the pc router. Running a ping from the pc router to the radio port in the ping 
specifying to use not ANY but the backhaul port as we labeled it will get us 
around 10-15% packet loss. While at the same time running a ping from the 
bachaul radio to the router gets 0% packet loss using the same method. How is 
this possible?

PC PORT (ethernet cable) RADIO ETH = Lost packets

Radio ETH (ethernet cable) PC PORT = 0 Lost packets

? 



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.





--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to