We use this for setting up VL radios, including speed. If you want to automate it, just use $1, $2 as command line variables instead of reading in answers from questions. Then you could include it in a loop that cycles through a database generated list.
I wish more manufacturers actually knew something about SNMP so we could program all radios this way. Saves a lot of human error. #!/bin/bash echo -e "|----------------------------------------------------------------------|" echo -e "| pinging radio to check if it is there and is set to factory defaults |" echo -e "| hit control-C if pinging fails |" echo -e "|----------------------------------------------------------------------|" ping -n -c 2 10.0.0.1 echo -e "|----------------------------------------------------------------------|" echo -e "| what will the radio be named? |" read UNITNAME echo -e "| what IP address will this radio have? |" read IP echo -e "| This radio will have " $IP echo -e "| what ESSID will this radio have? |" read ESSID echo -e "| Speed choice: Type 1 for gold (2 down 1 up), 2 for platinum connectme (3 down 1.5 up), 3 platinum (3 down, 2 up)" read SPEED echo -e "| Enter the antenna gain" read ANTENNA echo -e "|----------------------------------------------------------------------|" CM="changeme" SP="/usr/bin/snmpset -v1 -r2 -On -c" SG="/usr/bin/snmpget -v1 -r2 -On -c" GW=`echo $IP|cut -d. -f1-3`.1 echo -e "|----------------------------------------------------------------------|" echo -e "| Setting up MIR/CIR |" echo -e "|----------------------------------------------------------------------|" case $SPEED in 1) $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.2.0 i 2000 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.3.0 i 1000 ;; 2) $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.2.0 i 3000 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.3.0 i 1500 ;; 3) $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.2.0 i 3000 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.3.0 i 2000 ;; esac $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.4.0 i 128 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.5.0 i 128 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.6.0 i 1000 echo -e "Now setup as:" echo -e "MirAUtoSU "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.2.0` echo -e "MirSUtoAU "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.3.0` echo -e "CirAUtoSU "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.4.0` echo -e "CirSUtoAU "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.5.0` echo -e "MaxDelay "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.7.6.0` echo -e "CIR/MIR all setup" echo -e "|----------------------------------------------------------------------|" echo -e "| Setting wireless menu items |" echo -e "|----------------------------------------------------------------------|" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.1.1.0 s "$ESSID" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.11.1.0 i 2 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.13.1.0 i 2 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.17.0 s "$ANTENNA" echo -e "ESSID "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.1.1.0` echo -e "Best AU "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.11.1.0` echo -e "ATPC "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.13.1.0` echo -e "AntennaGain "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.6.17.0` echo -e "Done setting wireless items" echo -e "|----------------------------------------------------------------------|" echo -e "| Setting up management items |" echo -e "|----------------------------------------------------------------------|" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.3.0 s "$UNITNAME" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.8.2.0 s "alsochangeme" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.8.3.0 s "changeme" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.4.1.0 a $IP $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.4.2.0 a 255.255.255.0 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.4.3.0 a $GW echo -e "Name "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.3.0` echo -e "Inst PW "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.8.2.0` echo -e "Admin PW "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.8.3.0` echo -e "IP address "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.4.1.0` echo -e "Netmask "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.4.2.0` echo -e "Gateway "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.4.3.0` echo -e "Done setting up manamgent items" echo -e "|----------------------------------------------------------------------|" echo -e "| Setting up filter and network management |" echo -e "|----------------------------------------------------------------------|" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.8.1.0 i 1 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.3.1.0 i 3 $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.3.2.0 i 1 echo -e "UserFilteringOption "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.8.1.0` echo -e "AccessToNwMng "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.3.1.0` echo -e "NwMngFilter "`$SG private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.3.2.0` echo -e "Network Filtering all setup" echo -e "|----------------------------------------------------------------------|" echo -e "| rebooting radio to new settings - please wait 60 seconds |" echo -e "|----------------------------------------------------------------------|" $SP private 10.0.0.1 .1.3.6.1.4.1.12394.1.1.2.1.0 i 2 sleep 60s echo -e "|----------------------------------------------------------------------|" echo -e "| pinging radio with new IP number |" echo -e "|----------------------------------------------------------------------|" ping -n -c 4 $IP echo -e "|----------------------------------------------------------------------|" echo -e "| done. ready for use |" echo -e "|----------------------------------------------------------------------|" On Thu, Nov 26, 2009 at 02:22:57PM -0500, Jeremy Parr wrote: > Before I reinvent the wheel with an Expect script or SNMP query, does > anyone have scripts written for automating bandwidth/MAC allocations > for the VL? It does not support RADIUS, so any automated changes need > to be pushed via telnet or SNMP. > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -- /* Jason Philbrook | Midcoast Internet Solutions - Wireless and DSL KB1IOJ | Broadband Internet Access, Dialup, and Hosting http://f64.nu/ | for Midcoast Maine http://www.midcoast.com/ */ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
