Good results here as well with Citel units. Unfortunately, the radio
sometimes still gets it through through the coax. Switching over to
polyphasers before spring!

On Mon, Jan 11, 2010 at 11:56 AM, Data Technology <w...@dtisp.com> wrote:

> I guess I hit enter before I was thru typing.
>
> I also use the Citel in-line suppressors (60v) in every AP that I build.
> http://www.citel.us/data_sheets/dataline/MJ850524D3A6012B-DataSheet.pdf
>
> Knock on wood, I have never lost an ethernet port on a unit that has
> this surge suppressor installed.
> I had an AP go dead a couple of months ago.  When I opened the enclosure
> there was water in the bottom of the enclosure and the surge suppressor
> was actually melted from the connector shorting out, but the MT board
> was fine.
>
> LaRoy  McCann
> Data Technology
>
> Josh Luthman wrote:
> > I know it isn't said very often but the voltages for the devices we
> commonly
> > use are
> >
> > Canopy 12-24v
> > Nano/Locostations 12-25v
> > MT 4xx 10-28v
> >
> > Cordless drill battery 18-22v
> >
> > Having a mobile POE priceless
> >
> > Josh Luthman
> > Office: 937-552-2340
> > Direct: 937-552-2343
> > 1100 Wayne St
> > Suite 1337
> > Troy, OH 45373
> >
> > "The secret to creativity is knowing how to hide your sources."
> > --- Albert Einstein
> >
> >
> > On Mon, Jan 11, 2010 at 11:31 AM, Data Technology <w...@dtisp.com>
> wrote:
> >
> >
> >> Good point about the voltage.
> >> I use them mostly for UBNT CPE.  What MT units I used them with were 18
> >> or 24V.
> >>
> >>
> >>
> >> Tom DeReggi wrote:
> >>
> >>> The 600SSB still clamps at 35V like the 300SS, right?
> >>>
> >>> If so, make sure you are using Less than 35V Mikrotiks units and not
> 48V
> >>> configurations.
> >>>
> >>> As an alternative.... Citel also makes a nice outdoor mountable unit
> >>> specifically for wifi pin-outs, about the same cost ($25ish).
> >>> They have both 60Vand 35V models.
> >>>
> >>> Tom DeReggi
> >>> RapidDSL & Wireless, Inc
> >>> IntAirNet- Fixed Wireless Broadband
> >>>
> >>>
> >>> ----- Original Message -----
> >>> From: "Data Technology" <w...@dtisp.com>
> >>> To: <sc...@brevardwireless.com>; "WISPA General List" <
> >>>
> >> wireless@wispa.org>
> >>
> >>> Sent: Monday, January 11, 2010 9:55 AM
> >>> Subject: Re: [WISPA] Can I use Motorola Canopy 600SSB Surge Suppressor
> >>>
> >> with
> >>
> >>> UBNT radios or Mikrotik?
> >>>
> >>>
> >>>
> >>>
> >>>> Yes you can.  You have to move the ground jumper.  Just loosen the
> nuts
> >>>> and move the jumper to the hole with no copper.
> >>>> The jumper will short out the + voltage to ground.
> >>>>
> >>>> LaRoy McCann
> >>>> Data Technology
> >>>>
> >>>>
> >>>> Scott Carullo wrote:
> >>>>
> >>>>
> >>>>> Not sure if it matters that the voltage + and - are swapped...
> >>>>>
> >>>>> Thanks
> >>>>>
> >>>>> Scott Carullo
> >>>>> Brevard Wireless
> >>>>> 321-205-1100 x102
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>
> --------------------------------------------------------------------------------
> >>
> >>>>> WISPA Wants You! Join today!
> >>>>> http://signup.wispa.org/
> >>>>>
> >>>>>
> >>
> --------------------------------------------------------------------------------
> >>
> >>>>> WISPA Wireless List: wireless@wispa.org
> >>>>>
> >>>>> Subscribe/Unsubscribe:
> >>>>> http://lists.wispa.org/mailman/listinfo/wireless
> >>>>>
> >>>>> Archives: http://lists.wispa.org/pipermail/wireless/
> >>>>>
> >>>>> ----------
> >>>>>
> >>>>> This message has been scanned for viruses and
> >>>>> dangerous content by the Data Technology
> >>>>> MailScanner, and is believed to be clean.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>
> --------------------------------------------------------------------------------
> >>
> >>>> WISPA Wants You! Join today!
> >>>> http://signup.wispa.org/
> >>>>
> >>>>
> >>
> --------------------------------------------------------------------------------
> >>
> >>>> WISPA Wireless List: wireless@wispa.org
> >>>>
> >>>> Subscribe/Unsubscribe:
> >>>> http://lists.wispa.org/mailman/listinfo/wireless
> >>>>
> >>>> Archives: http://lists.wispa.org/pipermail/wireless/
> >>>>
> >>>>
> >>>> --
> >>>> Internal Virus Database is out-of-date.
> >>>> Checked by AVG.
> >>>> Version: 7.5.560 / Virus Database: 270.12.26/2116 - Release Date:
> >>>> 5/15/2009 6:16 AM
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>
> --------------------------------------------------------------------------------
> >>
> >>> WISPA Wants You! Join today!
> >>> http://signup.wispa.org/
> >>>
> >>>
> >>
> --------------------------------------------------------------------------------
> >>
> >>> WISPA Wireless List: wireless@wispa.org
> >>>
> >>> Subscribe/Unsubscribe:
> >>> http://lists.wispa.org/mailman/listinfo/wireless
> >>>
> >>> Archives: http://lists.wispa.org/pipermail/wireless/
> >>>
> >>> ----------
> >>>
> >>> This message has been scanned for viruses and
> >>> dangerous content by the Data Technology
> >>> MailScanner, and is believed to be clean.
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >>
> --------------------------------------------------------------------------------
> >> WISPA Wants You! Join today!
> >> http://signup.wispa.org/
> >>
> >>
> --------------------------------------------------------------------------------
> >>
> >> WISPA Wireless List: wireless@wispa.org
> >>
> >> Subscribe/Unsubscribe:
> >> http://lists.wispa.org/mailman/listinfo/wireless
> >>
> >> Archives: http://lists.wispa.org/pipermail/wireless/
> >>
> >>
> >
> >
> >
> --------------------------------------------------------------------------------
> > WISPA Wants You! Join today!
> > http://signup.wispa.org/
> >
> --------------------------------------------------------------------------------
> >
> > WISPA Wireless List: wireless@wispa.org
> >
> > Subscribe/Unsubscribe:
> > http://lists.wispa.org/mailman/listinfo/wireless
> >
> > Archives: http://lists.wispa.org/pipermail/wireless/
> >
> > ----------
> >
> > This message has been scanned for viruses and
> > dangerous content by the Data Technology
> > MailScanner, and is believed to be clean.
> >
> >
> >
>
>
>
>
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> --------------------------------------------------------------------------------
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>


--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to