Mike, What system are using the phone with? I just got a couple of Polycom IP 335 phones in today to play around with. I have installed Trixbox with a Linksys SPA3102 and a Grandstream GXW4108 gateway and it seems to work ok. Not had time to configure the Polycom's yet.
LaRoy McCann Data Technology Mike Hammett wrote: > To answer my own question, it appears that I could use a standard > PacWireless 48v PoE and just cross pins 4/5 and 7/8. 4/5 are negative and > 7/8 are positive on the Cisco, while 4/5 are positive and 7/8 are negative > on the PacWireless. PacWireless does have a reversed model, but it's only > 24v vs. the 48v required for the Cisco. > > To make all of this moot, I found a Cisco PoE unit immediately under the > Cisco phone. DOH! > > > ----- > Mike Hammett > Intelligent Computing Solutions > http://www.ics-il.com > > > > -------------------------------------------------- > From: "Mike Hammett" <wispawirel...@ics-il.net> > Sent: Wednesday, January 13, 2010 10:57 AM > To: <wireless@wispa.org> > Subject: [WISPA] Semi-OT Cisco PoE > > >> I believe I need a AIR-PWRINJ3 PoE injector for a Cisco 7960 phone. Would >> anything we use be an appropriate replacement? >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> -------------------------------------------------------------------------------- >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > ---------- > > This message has been scanned for viruses and > dangerous content by the Data Technology > MailScanner, and is believed to be clean. > > > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
