Ah, okay.  I was looking at "passive" which normally is reversed.  I'll have
to play with them and see what kind of use I can get.

 

Thanks!  So...  I think I now have a small surplus of PoE crossover
cables....  J

 

Bob-

 

 

 

From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Mathew Howard
Sent: Saturday, January 23, 2010 10:48 AM
To: WISPA General List
Subject: Re: [WISPA] AirGrid PoE

 

I've played with one a bit, they won't even take 12 volts. the only hope I
can see to get longer run out of them would be to use something like 7-9
volts, but I haven't had a chance to test what the max is they'll take
yet...

Polarity isn't reversed - it's still standard 4/5+ and 7/8-.

Robert West wrote: 

Okay, okay...  I ordered a few of the UBNT AirGrids from Jerry over at
Pasadena Networks.  Says it runs from a 5v PASSIVE connection from the
customers USB port.  Eh?  65 foot maximum Cat5 run for the 5v.....  A 65
foot run would be a bit under my norm.  I see using a separate injector
being standard for me with these but if they run with 5v (sheeesh) I can
only hope a normal injector with 15 or 24 volts can be tolerated by these
but since they are setup as a passive PoE, the polarity is swapped so to use
a normal PoE I gotta cross over the pairs....
 
 
 
Has anyone installed these yet?  Any tips, trick, frustrations to share?
 
 
 
Thanks!
 
 
 
Robert West
 
Just Micro Digital Services Inc.
 
740-335-7020
 
 
 
Logo5
 
 
 
 
  
 



  _____  



 
 
 
----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org
 
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
 
Archives: http://lists.wispa.org/pipermail/wireless/

 

  _____  







Total Control Panel

Login <https://asp-6.reflexion.net/login?domain=litewire.net> 




To: mat...@litewire.net
<https://asp-6.reflexion.net/address-properties?aID=7391891> 


From: wireless-boun...@wispa.org
<https://asp-6.reflexion.net/address-properties?aID=63469471> 


Message Score: 34

High (60): Pass


My Spam Blocking Level: Medium

Medium (75): Pass

        
Low (90): Pass


Block
<https://asp-6.reflexion.net/FooterAction?ver=1&bl-sender-address=1&rID=7391
891&aID=63469471>  this sender / Block
<https://asp-6.reflexion.net/FooterAction?ver=1&ent=1&bl-sender-address=1&rI
D=7391891&aID=63469471>  this sender enterprise-wide

        

Block
<https://asp-6.reflexion.net/FooterAction?ver=1&bl-sender-domain=1&rID=73918
91&aID=63469471>  wispa.org / Block
<https://asp-6.reflexion.net/FooterAction?ver=1&ent=1&bl-sender-domain=1&rID
=7391891&aID=63469471>  wispa.org enterprise-wide

        


This message was delivered because the content filter score did not exceed
your filter level.

 



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to