Like we said, Drop both sides till the signal gets in the -55 to -65 range. 
Doesn't matter what the power is, as long as the signal is around there. As 
its where your going to get your best throughput, Barring any other 
interference.

Nick Olsen
Network Engineer / Customer Support
(321) 205-1100 x106

----------------------------------------

From: "RickG" <rgunder...@gmail.com>
Sent: Monday, February 01, 2010 8:56 PM
To: "WISPA General List" <wireless@wispa.org>
Subject: Re: [WISPA] power

Ya, thats what I do. I'm just concerned about what the best power level 
is?
I hate to create a monster based on the wrong settings.

On Mon, Feb 1, 2010 at 8:21 PM, Robert West 
<robert.w...@just-micro.com>wrote:

> I have a few like that.  Cheap and quick for low density population.  Use 
a
> pac grid for the backhaul and a bullet with an omni for the AP.  Check 
your
> polarity, make sure you're on the right orientation and right radio.  My
> grids are horz. Pol and the omnis, well.....  Vertical of course!
>
> Bob-
>
>
>
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of RickG
> Sent: Monday, February 01, 2010 8:08 PM
> To: WISPA General List
> Subject: [WISPA] power
>
> OK, I need a little input. I've got several "poor mans repeaters" around 
by
> using a pair of bullets, one for backhaul and the other for the AP. 
Today,
> I
> installed a Bullet on a new customer that was a stones throw away from 
the
> AP. At full power, he got just under 1Mbps. Turning down the power, he 
got
> 3Mbps+. Is turning down the power on the CPE side on a test and trial 
basis
> or is there some kind of method to it?
> -RickG
>
>
>
> 
----------------------------------------------------------------------------

> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> 
----------------------------------------------------------------------------

> ----
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>
>
>
>
> 
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
> 
----------------------------------------------------------------------------
----
>
> WISPA Wireless List: wireless@wispa.org
>
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
>
> Archives: http://lists.wispa.org/pipermail/wireless/
>

----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----

WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/




--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to