It's an RS3000 running ROS 9.1.2.8.

I did try disabling OSPF and set up static routes. The behavior was exactly the 
same. I had inbound connectivity, but not outbound. So our ISP is routing those 
IPs to our gateway, and the riverstone knows where to go with them from there - 
to the mikrotik. But when originating from inside our network, it hits the 
riverstone at 10.0.4.1, but goes no further.

I'm not running HRT.

I appreciate the assistance. I'll be back at it tomorrow morning to try out any 
suggestions...

-Paul

On Feb 11, 2010, at 8:56 PM, Faisal Imtiaz wrote:

> Which Riverstone Box is it ? RS3000 or RS8000  also what is the ROS version
> you (Paul) are running ?
> 
> 
> If it is an OSPF issue or Routing issue... 
> 
> You should be able to set up the routing (static) and confirm if it is one
> or the other ?
> 
> Are you by any chance running  " hrt enable" command on any of the cards ?
> (temp. comment those commands out).
> 
> I have noticed that with HRT enabled, system does not take new routes into
> the RIB rightaway..
> 
> 
> 
> Faisal Imtiaz
> Computer Office Solutions Inc. /SnappyDSL.net
> Ph: (305) 663-5518 x 232
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Butch Evans
> Sent: Thursday, February 11, 2010 11:39 PM
> To: WISPA General List
> Subject: Re: [WISPA] Routing Help [Default Route to OSPF]
> 
> On Thu, 2010-02-11 at 23:31 -0500, Josh Luthman wrote: 
>> It's a Riverstone and Mikrotik.  No Cisco from what I caught.
> 
> Yeah...I decided to go back and look in the earlier messages in the thread.
> I had already put my foot in my mouth...thanks for keeping me from chewing
> with vigor.  ;-)
> 
> --
> ********************************************************************
> * Butch Evans                   * Professional Network Consultation*
> * http://www.butchevans.com/    * Network Engineering              *
> * http://store.wispgear.net/    * Wired or Wireless Networks       *
> * http://blog.butchevans.com/   * ImageStream, Mikrotik and MORE!  *
> ********************************************************************
> 
> 
> 
> ----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> ----------------------------------------------------------------------------
> ----
> 
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
> 
> 
> --------------------------------------------------------------------------------
> WISPA Wants You! Join today!
> http://signup.wispa.org/
> --------------------------------------------------------------------------------
> 
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to