Me too.  However, if you ever need to tap into the power from the PS2, the
board inside is the same board as the light station so it has a solder point
for a power jack.  The power jack and the PoE are connected in the same path
so you can tap into it if you ever need to do such a thing.  You can't
actually add a jack because there is no clearance but to solder on a pigtail
is very doable.

Bob-



-----Original Message-----
From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
Behalf Of Greg Ihnen
Sent: Tuesday, March 16, 2010 3:38 PM
To: WISPA General List
Subject: Re: [WISPA] Using the 2nd port on a PS2?

I wish this was an option on the PowerStations.

Greg

On Mar 16, 2010, at 2:27 PM, Robert West wrote:

> On the new Nanos there is.   By default the power won't pass through but
in
> the firmware you can click the box for PoE pass-through then you can use
it
> to power up a second device.  I envision using something like that as
maybe
> a bridge for going around a corner or to bounce the signal around some
> obstacle by using one to catch the signal then a second to redirect it
out.
> 
> 
> Bob-
> 
> 
> -----Original Message-----
> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
> Behalf Of Greg Ihnen
> Sent: Tuesday, March 16, 2010 2:37 PM
> To: WISPA General List
> Subject: Re: [WISPA] Using the 2nd port on a PS2?
> 
> Bob,
> 
>       You mean there's some way to pass the incoming POE to the 2nd port?
> How?
> 
> Thanks!
> 
> Greg
> 
> On Mar 16, 2010, at 1:56 PM, Robert West wrote:
> 
>> The cover has the place for that cable covered but you can "snap if out"
> of
>> the cover if you want to use it.  You can also use it as PoE but by
> default
>> the firmware has the PoE turned off on that port.  I find it handy to
> mount
>> it, run the cable, install the PoE inside the clients structure then plug
> in
>> with the network to the second port to air it.  Really sweet.  Also love
> the
>> AirGrids where I can power it up with the USB from the netbook and aim it
>> all with no cable ran at all.  I've PRE installed 2 AirGrids that way,
> just
>> hung them, aimed and left for the installer boy to come later to run the
>> cable Was doing a site survey and just hung it on their TV tower and left
>> it.  Saved time.........
>> 
>> Bob-
>> 
>> -----Original Message-----
>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>> Behalf Of Josh Luthman
>> Sent: Tuesday, March 16, 2010 2:11 PM
>> To: WISPA General List
>> Subject: Re: [WISPA] Using the 2nd port on a PS2?
>> 
>> What about the weather getting to it?  It's unplugged for the most
>> part.  The primary port has the wire to keep away spiders or something
>> from laying eggs.  Are spiders (bugs/dirt/etc) conductive?
>> 
>> Josh Luthman
>> Office: 937-552-2340
>> Direct: 937-552-2343
>> 1100 Wayne St
>> Suite 1337
>> Troy, OH 45373
>> 
>> "Success is not final, failure is not fatal: it is the courage to
>> continue that counts."
>> --- Winston Churchill
>> 
>> 
>> 
>> On Tue, Mar 16, 2010 at 2:05 PM, Robert West <robert.w...@just-micro.com>
>> wrote:
>>> I second that.  Also good for the new Nanos as well with their second
>> port.
>>> 
>>> Bob-
>>> 
>>> 
>>> -----Original Message-----
>>> From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On
>>> Behalf Of Philip Dorr
>>> Sent: Tuesday, March 16, 2010 9:21 AM
>>> To: WISPA General List
>>> Subject: Re: [WISPA] Using the 2nd port on a PS2?
>>> 
>>> The secondary port on the PS2 is just another ethernet port, it does
>>> not have any POE (in or out, AFAIK).  You can use it to align the
>>> antenna better using a netbook and the web UI alignment tool.
>>> 
>>> On Tue, Mar 16, 2010 at 6:29 AM, Greg Ihnen <os10ru...@gmail.com> wrote:
>>>> Has anyone found anything useful to do with the 2nd port on a PS2? I'm
>>> finding very little information on that port on the 'net. Does it share
>> the
>>> PS2's POE?
>>>> 
>>>> Greg
>>>> 
>>>> 
>>>> 
>>> 
>> 
>
----------------------------------------------------------------------------
>>> ----
>>>> WISPA Wants You! Join today!
>>>> http://signup.wispa.org/
>>>> 
>>> 
>> 
>
----------------------------------------------------------------------------
>>> ----
>>>> 
>>>> WISPA Wireless List: wireless@wispa.org
>>>> 
>>>> Subscribe/Unsubscribe:
>>>> http://lists.wispa.org/mailman/listinfo/wireless
>>>> 
>>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>>> 
>>> 
>>> 
>>> 
>> 
>
----------------------------------------------------------------------------
>>> ----
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>> 
>> 
>
----------------------------------------------------------------------------
>>> ----
>>> 
>>> WISPA Wireless List: wireless@wispa.org
>>> 
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>> 
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>> 
>>> 
>>> 
>>> 
>> 
>
----------------------------------------------------------------------------
>> ----
>>> WISPA Wants You! Join today!
>>> http://signup.wispa.org/
>>> 
>> 
>
----------------------------------------------------------------------------
>> ----
>>> 
>>> WISPA Wireless List: wireless@wispa.org
>>> 
>>> Subscribe/Unsubscribe:
>>> http://lists.wispa.org/mailman/listinfo/wireless
>>> 
>>> Archives: http://lists.wispa.org/pipermail/wireless/
>>> 
>> 
>> 
>> 
>
----------------------------------------------------------------------------
>> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> 
>
----------------------------------------------------------------------------
>> ----
>> 
>> WISPA Wireless List: wireless@wispa.org
>> 
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>> 
>> Archives: http://lists.wispa.org/pipermail/wireless/
>> 
>> 
>> 
>> 
>
----------------------------------------------------------------------------
> ----
>> WISPA Wants You! Join today!
>> http://signup.wispa.org/
>> 
>
----------------------------------------------------------------------------
> ----
>> 
>> WISPA Wireless List: wireless@wispa.org
>> 
>> Subscribe/Unsubscribe:
>> http://lists.wispa.org/mailman/listinfo/wireless
>> 
>> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
>
----------------------------------------------------------------------------
> ----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
----------------------------------------------------------------------------
> ----
> 
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/
> 
> 
> 
>
----------------------------------------------------------------------------
----
> WISPA Wants You! Join today!
> http://signup.wispa.org/
>
----------------------------------------------------------------------------
----
> 
> WISPA Wireless List: wireless@wispa.org
> 
> Subscribe/Unsubscribe:
> http://lists.wispa.org/mailman/listinfo/wireless
> 
> Archives: http://lists.wispa.org/pipermail/wireless/



----------------------------------------------------------------------------
----
WISPA Wants You! Join today!
http://signup.wispa.org/
----------------------------------------------------------------------------
----
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to