Want to remind on the Latency factor versus window size that will limit the maximum speed possible to transfer per TCP session. To test 1G, you really need to have a near by low latency site to test to, to get accurate result for a single session. And may be impossible to fill capacity without multiple sessions. You'll probably have to use UDP to test for capacity. Testing TCP quality will be a bit tougher.
Tom DeReggi RapidDSL & Wireless, Inc IntAirNet- Fixed Wireless Broadband ----- Original Message ----- From: "Marco Coelho" <coelh...@gmail.com> To: "WISPA General List" <wireless@wispa.org> Sent: Thursday, April 15, 2010 3:53 PM Subject: [WISPA] looking for iperf test site with 1G open > I'm looking for someone with at least 1Gb/s of unused bandwidth to do > a few iperf tests against. I just lit up some new fiber and want to > see if it's up to snuff. > > Thanks in advance. > > Marco > > -- > Marco C. Coelho > Argon Technologies Inc. > POB 875 > Greenville, TX 75403-0875 > 903-455-5036 > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/