1. 17dBm / 17 dBm 2. Speed is the same on both sides. 3. (trango-view)# linktest 1 LOCK RSSI MSE BER TX RX 1> 1 -41.10 dBm -34.40 dB 0.00E+00 256QAM 256QAM (trango-view)#
(trango-config)# linktest 1 LOCK RSSI MSE BER TX R X 1> 1 -38.30 dBm -34.90 dB 0.00E+00 256QAM 2 56QAM On Sun, Jun 27, 2010 at 12:32 AM, Travis Johnson <t...@ida.net> wrote: > Did you check: > > (1) power level on each side > (2) speed settings (same modulation and channel size on each side) > (3) what does the linktest show on each side? > > Travis > Microserv > > can...@believewireless.net wrote: >> >> We can access the units via their IBM addresses but they won't pass >> traffic. We have rebooted the radios, power cycled them, and nothing >> happens. >> >> Interestingly, the Mikrotik on one end of the link is showing up in >> the neighbor list. So something is getting through. >> >> >> >> -------------------------------------------------------------------------------- >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> -------------------------------------------------------------------------------- >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/