Water in a bullet took down my entire network but that was a version 1 release which the water was coming into the LED strip. This has been fixed. However, in MY case it was from a failed install where installer boy taped the omni connector down to the N connector forcing the water column in to the bullet.
A bad install can cause many horrors no matter the manufacturer. Be brave, my friend. Save the major mojo. Try the UBNT stuff. Bobenstein- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Kurt Fankhauser Sent: Monday, August 09, 2010 12:06 PM To: 'WISPA General List' Subject: Re: [WISPA] I NEED HELP also!!! Forbes, Curious as to if this bullet had gotten water in it or what. Someone on the list a while back had a bullet got water in and take down there whole network. If this is the case I'll factor that in when I consider deploying UBNT or not. Kurt Fankhauser WAVELINC P.O. Box 126 Bucyrus, OH 44820 419-562-6405 _____ From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Forbes Mercy Sent: Monday, August 09, 2010 11:28 AM To: WISPA General List Subject: Re: [WISPA] I NEED HELP also!!! Ron, I'm not really sure if you're asking about what I looked for in WireShark or just where is WireShark? The program I just got from google. Ultimately I went to the tower where the problem was and isolated it from the network. Shut off everyone and turned them on one at a time, the IP Conflict occurred immediately when that person was on. I went to their house and the Bullet(Ubiquiti) wouldn't reset so I pulled it, replaced it and problem gone... a VERY long weekend! Let me know if you need any other help. Those guys with the shirts that say how bad bridging a large network is are right on! Forbes On 8/9/2010 8:20 AM, Ron Wallace wrote: Forbes, I am experiencing a Similar or The same problem You had. Could you share the Wireshark you learned from Brett? Ron Wallace Hahnron, Inc. 220 S. Jackson Dt. Addison, MI 49220 Phone: (517)547-8410 Mobile: (517)270-2410 e-mail: rwall...@newgenet.net rwall...@tigernet.bz -----Original Message----- From: Forbes Mercy [mailto:forbes.me...@wabroadband.com] Sent: Monday, August 2, 2010 12:21 AM To: 'WISPA General List' Subject: Re: [WISPA] I NEED HELP Hey whoever forwarded my issue to Brett thanks, he pointed out how to isolate individual bridges with WireShark. I did that and found the tower, it's too late today but having that tower down brought the rest of the system back up. As Marlon said "so will you be routed tomorrow?" Well maybe not tomorrow but the switchover from Bridged to Routed is about my highest priority now. I missed a great summer weekend chasing this down and all of you helped me tremendously. Thanks so much for once again reminding me how great it is being in WISPA. Forbes ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ ---------------------------------------------------------------------------- ---- WISPA Wants You! Join today! http://signup.wispa.org/ ---------------------------------------------------------------------------- ---- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/