On Sat, Aug 14, 2010 at 05:15:05PM -0400, Scott Reed wrote:
> I have an RB433AH running ROS3.30.  It has been running well for
> months or longer.  Yesterday afternoon it lost the OSPF routes that
> come in from the backhaul interface.  I rebooted.  Still no go.  It
> showed 9 potential neighbors in Init state on that interface.  It
> gets neighbors on the wireless AP interface.  I power cycled it this
> morning.  Same thing, 9 neighbors in Init state.
>
> On of those neighbors is inches away so I put a 3 foot jumper between
> ether2 on the bad unit to ether2 on the good one.  They instantly
> became neighbors.
>
> What do I need to look for on the interface that is not working to get
> it to go to the next step?  By the way, that interface is the link to
> the Internet for 2 APs and all of the customers on those 2 APs are
> moving traffic, so it is not a physical interface that is not working.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a00800949f7.shtml#trouble_neigh_states

-- 
Scott Lambert                    KC5MLE                       Unix SysAdmin
lamb...@lambertfam.org



--------------------------------------------------------------------------------
WISPA Wants You! Join today!
http://signup.wispa.org/
--------------------------------------------------------------------------------
 
WISPA Wireless List: wireless@wispa.org

Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless

Archives: http://lists.wispa.org/pipermail/wireless/

Reply via email to