I have this problem using RocketM5's and RocketM3's in my whole network. I can get great "air" tests. I have a nice managed Dell switch on one side, and interestingly enough after plugging the M3 into it my speeds got better. I plug it into my laptop, and I get the same result as the MikroTik. I've been back and forth with UBNT support and no resolve. Regards,
Chuck On Tue, Sep 7, 2010 at 7:17 PM, can...@believewireless.net < p...@believewireless.net> wrote: > The longer the cable run, the more you will need 24V. If your unit > runs reliably at 12-15V, then you are fine. However, if it starts > rebooting during tests, then you will need to increase the voltage. > > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ >
-------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
