When you take the ethernet ports off auto are you using a crossover cable? I learned that the hard way (well not too hard, when I posted that turning off auto made the port on some UBNT gear go dead folks here educated me).
Greg On Sep 30, 2010, at 12:51 PM, Rubens Kuhl wrote: > (sorry for the cross-posting) > > > One test scenario of a RB-1100 are showing some strange issues including > - Ports do not connect with forced speed/duplex, only with auto > - Iperf tests going thru it does OK with UDP but simply passes no TCP traffic > > It looks pretty close to this post on MT forum: > http://forum.mikrotik.com/viewtopic.php?f=3&t=43212&p=229098#p229098 > > ROS version is 4.11, with firmware updated to 2.27 via system > routerboard upgrade (but 2.26 had the same issues). Conntrack is off. > > > Any hints ? > > > Rubens > > > -------------------------------------------------------------------------------- > WISPA Wants You! Join today! > http://signup.wispa.org/ > -------------------------------------------------------------------------------- > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ -------------------------------------------------------------------------------- WISPA Wants You! Join today! http://signup.wispa.org/ -------------------------------------------------------------------------------- WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
